|
| |
|
Parts and Supplies for CD and Karaoke Players |
|
|
Laser Pickup KSS-210A, KSS210B,
KSS-212A, KSS212B
The most common CD laser pickup found today! The KSS-210A can also be used to replace the KSS-210B, KSS-212A and KSS-212B. Original Sony part number 8-848-062-11. Found in CD Players under many different brand names. Selling for up to $37.50 elsewhere. (Note: soldering capability and solder wick required to remove static-protection shorting link upon installation.) Not for use in Aiwa brand CD Players.
 Instructions for installation (PDF)
Note: No refunds are given on laser pickups.
Defective pickups are handled in accordance with the
manufacturers warranty (like for like replacement)
|
Laser Pickups KSS-213B and KSS-213C
Very popular CD laser pickup found in many makes and models of CD players and Karaoke machines! Original Sony part number 8-848-379-31 and 8-848-482-02. Selling for up to $37.50 elsewhere. (Note: soldering capability and solder wick required to remove static-protection shorting link upon installation.)
Instructions for installation (PDF)
Note: No refunds are given on laser pickups.
Defective pickups are handled in accordance with the
manufacturers warranty (like for like replacement)
|
 CD Player Jumper Film
Connection cable from the PC board to the laser pickup. This jumper is 8" long, 21/32" wide, and has 16 pins. It is designed to connect to either the KSS210, KSS212 or KSS213 series of laser pickups. Jumper film ends are rather fragile, so if the film has been disconnected and reinserted multiple times it may damage the ends and need replacing.
JFS-23 Jumper Film Strip - $3.95
|
Laser Pickup KSS-240A
Very popular CD laser pickup found in many makes and models! Original Sony part number 8-848-144-11 and 8-848-233-11. Selling for up to $59.00 elsewhere. (Note: soldering capability and solder wick required to remove static-protection shorting link upon installation.)
KSS-240A
$32.95 ea
Availability: Usually 4-6 Days
Note: No refunds are given on laser pickups.
Defective pickups are handled in accordance with the
manufacturers warranty (like for like replacement)
|
Special! CD, CD-ROM and Karaoke
Laser Cleaner
Hurricane Power brand. Designed to safely remove dirt, dust and restore optimum performance on you CD, DVD, CD Game and CD-ROM equipment.
CD lens collect dirt, dust and other undesired particles which cause distortion, data errors and affect performance. The CD Laser Lens Cleaner is specifically designed to eliminate these undesired elements and restore the optimum performance of your CD, DVD, CD Game and CD-ROM equipment. Uses a super-soft brush cleaning system to ensure thorough and reliable cleaning, without harm to the laser lens. With Voice Instructions on the CD.
PC-7012 $6.95
|
CD/DVD/CDG Scratch Repair Kit
Repair damaged CDs and DVDs (even video game discs) you had otherwise given up on with this RCA scratch repair kit. Repairs most minor scratches on up to 50 discs. Kit includes surface repair fluid, disc cleaner fluid, five application swabs, and disc polishing cloth.
Stock No: RD-1163 $7.95
|
Diagnostic Test CD 
•Replaces all those expensive tone and noise generators used to evaluate and calibrate audio components •Contains all the necessary test tones to accurately evaluate, calibrate and measure your audio systems performance •Contains over 40 tracks •Checks equipment for distortion •Listens for noise generated by components or power source •Checks emphasis circuitry of CD players •Checks frequency response with tones from 5Hz~20Hz •Checks speaker placing and surround sound emphasis
DTC-1 $9.95
|
|
General CD-Player Belt Kit
|
|
Contains the 10 most popular belts used in CD Players
|
|
Includes one each of the following sizes:
SBM2.5, SBM3.0, SBM3.2, SBM3.4, SBM3.6, SBM4.0, SBM4.2, SBM4.6, SBM5.0, SBM5.6
|
|
|
|
SBS (Square Belt Small) belts are used in a few CD players, These belts are 1.2mm thick, roughly the thickness of a penny. I.C. (inside circumference) is shown in inches.
|
|
Part # |
I.C.* |
Thickness |
Price ea |
Purchase |
|
SBS2.0 |
2.0 |
.046" (1.2mm) |
$1.20 |
|
|
SBS2.4 |
2.4 |
.046" (1.2mm) |
$1.20 |
|
|
SBS2.6 |
2.6 |
.046" (1.2mm) |
$1.20 |
|
|
SBS3.0 |
3.0 |
.046" (1.2mm) |
$1.20 |
|
|
SBS3.2 |
3.2 |
.046" (1.2mm) |
$1.20 |
|
|
SBS3.5 |
3.5 |
.046" (1.2mm) |
$1.20 |
|
|
SBS4.0 |
4.0 |
.046" (1.2mm) |
$1.20 |
|
|
SBS4.6 |
4.6 |
.046" (1.2mm) |
$1.20 |
|
|
SBS5.1 |
5.1 |
.046" (1.2mm) |
$1.20 |
|
|
SBS5.6 |
5.6 |
.046" (1.2mm) |
$1.20 |
|
SBM (Square Belt Medium) belts are more typically found in CD players. I.C. (inside circumference) is shown in inches. Their thickness is about .065 inches (1.65mm) (about the thickness of a quarter).
|
|
Part # |
I.C.* |
Thickness |
Price ea |
Purchase |
|
SBM2.3 |
2.3 |
.065" (1.65mm) |
$1.20 |
|
|
SBM2.5 |
2.5 |
.065" (1.65mm) |
$1.20 |
|
|
SBM2.8 |
2.8 |
.065" (1.65mm) |
$1.20 |
|
|
SBM3.0 |
3.0 |
.065" (1.65mm) |
$1.20 |
|
|
SBM3.2 |
3.2 |
.065" (1.65mm) |
$1.20 |
|
|
SBM3.4 |
3.4 |
.065" (1.65mm) |
$1.20 |
|
|
SBM3.6 |
3.6 |
.065" (1.65mm) |
$1.20 |
|
|
SBM4.0 |
4.0 |
.065" (1.65mm) |
$1.20 |
|
|
SBM4.2 |
4.2 |
.065" (1.65mm) |
$1.20 |
|
|
SBM4.6 |
4.6 |
.065" (1.65mm) |
$1.20 |
|
|
SBM5.0 |
5.0 |
.065" (1.65mm) |
$1.20 |
|
|
SBM5.3 |
5.3 |
.065" (1.65mm) |
$1.20 |
|
|
SBM5.6 |
5.6 |
.065" (1.65mm) |
$1.20 |
|
You may be wondering how to measure the sizes of your existing belts. Click here
to find out how. |
Copyright ©2010 Studio Sound Electronics - All Rights Reserved
|
