Fender™ Potentiometers
("Pots")

Photo

Description

Price Purchase


Click on photo for
larger view
POT - CTS,  3/8" BUSHING
Top quality 24 mm carbon composition. 300° rotation. 1/2 watt, 500VDC rating. 1/4" diameter solid metal shaft, 3/8" bushing, solder lugs. Fits perfectly in vintage amps like Fender™ (Tweed, Brownface, Blonde, original Blackface and original Silverface Models), all Marshalls up to 1979 and some of the JCM800 versions, vintage Vox, vintage Orange, vintage Hiwatt, vintage Boogie, Sound City, Music Man, and many more. With correct 1/4" shaft and 3/8" bushing. Superior quality, solderable back!    CTS was the original OEM supplier for vintage Fender™ pots.  Note:  250K J-Taper, 1 Meg J-Taper, and 3 Meg Reverse Audio (C3M) pots have brass colored shafts.
Select Pot Value in Options
INCLUDES NUT & WASHER  (For spare or replacement nut, order the JNUT-38 nut found in this section)
Part #P-VC-XX
 

Starting at
$5.95

Select Option:


Quantity:





Click on photo for
larger view

POT - CTS, 3/8" BUSHING, NYLON SHAFT
Top quality 24 mm carbon composition. 300° rotation. 1/2 watt, 500VDC rating. 1/4" diameter nylon shaft, 3/8" bushing, solder lugs. Exact fit for hand-wired American made amplifiers such as vintage Fender™ and others.   Nylon shaft pots were used in most Fender silverface series amps from the late 60s and 70s.  CTS was the original OEM supplier for vintage Fender™ pots.
INCLUDES NUT & WASHER  (For spare or replacement nut, order the JNUT-38 nut found in this section)
Part #P-VCT-XX
Starting at $4.95
Select Option:


Quantity:


Click on photo for
larger view

POT - CTS, 3/8" BUSHING, WITH SPST PUSH-PULL SWITCH - A1m
24 mm carbon composition. 300° rotation. 1/2 watt, 500VDC rating. 1/4" diameter shaft, 3/8" bushing, solder lugs, with push-pull SPST (two terminal) switch.  For hand-wired American made amplifiers such as vintage Fender™ and others.  Value is A1M.   INCLUDES NUT & WASHER.
 

Part #P-VCPS-A1M
$14.95




Click on photo for
larger view
POT - CTS, 3/8" BUSHING, WITH DPST PUSH-PULL SWITCH - VALUE:  A250K
24 mm carbon composition. 300° rotation. 1/2 watt, 500VDC rating. 1/4" diameter smooth shaft, 3/8" bushing, solder lugs, with push-pull DPDT (six terminal) switch.  For hand-wired American made amplifiers such as vintage Fender and others.  Available in A250K (Base and Treble controls on most 60s and 70s Blackface and Silverface Amps 

Note:   Will fit most silverface amps, as long as the angle between the front panel and the base of the chassis is greater than or equal to 65 degrees.    Not all Fender silverface amps have the same angle on the front panel.   Those with angles less than 65 degrees will not have sufficient room to mount the pot.

Wiring for the switch is connected via 6 solder points (holes) on the PC board, immediately below the 3 pot terminals.    When the pot knob is pushed in, C1 is connected to 2, and C2 is connected to 4.  When the knob is pulled out, C1 is connected to 1, and C2 is connected to 3.    May be used in Bass or Treble positions for various modifications in vintage Fender amps, including pull boost, vibrato or reverb on-off, tone slope shift, etc.

 INCLUDES NUT & WASHER.
 

Part #P-DPPS-XX

$17.95
Select Option:

Quantity:


Click on photo for
larger view

POTENTIOMETER WITH SWITCH, Used as the replacement for Fender part number 012561.   Distortion control in the Fender Super Twin and the Fender PS-300 (sometimes referred to as the 300-PS).   Has flattened D-shaft and rotary switch control.   The pot is a B100K.


Part #012561

$8.95

Pots for Original Blonde and Brown Series Amps from
1960-1963
(Not Reissues)
   


Click on photo for
larger view
POT - Revisit™, 24MM, SOLID SHAFT
24 mm carbon composition, 300° rotation. 1/2 watt, 500VDC rating. 1/4" diameter shaft, 3/8" diameter bushing, solder lugs. For hand-wired American made amplifiers such as vintage Fender™, all Marshalls up to 1979 and some of the JCM800 versions, vintage Vox, vintage Orange, vintage Hiwatt, vintage Boogie, Sound City, Music Man, and many more.   For a downloadable pot cross-reference for Fender brownface models, click here.
INCLUDES NUT & WASHER 
Part #P-FBF-XX
Starting at
$2.95
Select Option:

Quantity:



Click on photo for
larger view
POT - Revisit™, 24MM, SOLID SHAFT, 3M & 10M REVERSE AUDIO
24 mm carbon composition, 300° rotation. 1/2 watt, 500VDC rating. 1/4" diameter shaft, 8mm diameter bushing, solder lugs. For hand-wired American made amplifiers such as vintage Fender™ and others.   For a downloadable pot cross-reference for Fender brownface models, click here.
INCLUDES NUT & WASHER 
Part #P-FBF-XX
Starting at
$3.95
Select Option:

Quantity:



Click on photo for
larger view
POT -  Revisit™ , 350K AUDIO WITH 70K TAP, 9MM BUSHING, FENDER™ BROWNFACE SERIES TREBLE POT
16mm carbon composition. 300° rotation. 1/2 watt, 500VDC rating. 1/4" diameter shaft, 9mm" bushing, solder lugs. Special manufacture, to replace the treble pots on certain Fender™ 1961-1963 Brownface models, such as Bassman 6G6, Concert 6G12A, Pro 6G5A, Showman 6G14, Super 6G4A, Tremolux 6G9, Vibrolux 6G11, and the Vibroverb 6G16.   For a downloadable pot cross-reference for Fender brownface models, click here.
INCLUDES NUT & WASHER 
Part #P-FBF-350KA-70KT
$4.95


Pots for Original Tweed Amps from 1947-1959
(Not Reissues)
   


Click on photo for
larger view
POT - Revisit™, 24MM, SOLID SHAFT
24 mm carbon composition, 300° rotation. 1/2 watt, 500VDC rating. 1/4" diameter shaft, 3/8" diameter bushing, solder lugs. For hand-wired American made amplifiers such as vintage Fender™ and others.   For a downloadable pot cross-reference for Fender brownface models, click here.
INCLUDES NUT & WASHER 
Part #P-FBF-XX
Starting at
$2.95
Select Option:

Quantity:



Click on photo for
larger view
POT - Revisit™, 24MM, SOLID SHAFT, 3M & 10M REVERSE AUDIO
24 mm carbon composition, 300° rotation. 1/2 watt, 500VDC rating. 1/4" diameter shaft, 8mm diameter bushing, solder lugs. For hand-wired American made amplifiers such as vintage Fender™ and others.   For a downloadable pot cross-reference for Fender brownface models, click here.
INCLUDES NUT & WASHER 
Part #P-FBF-XX
Starting at
$3.95
Select Option:

Quantity:



Click on photo for
larger view
POT - Revisit™ , 1 MEG AUDIO TAPER, 3/8" BUSHING, WITH SPST ROTARY SWITCH
24 mm carbon composition. 300° rotation. 1/2 watt, 500VDC rating. 1/4" diameter shaft, 3/8" bushing, solder lugs, with rotary SPST (two terminal) switch.  Replacement for the volume control with AC switch on the 5C1 Champ, 5E1 Champ, 5F1 Champ, 5B3 Deluxe.   Replacement for the tone control with AC switch on the 5B2 Princeton, 5C2 Princeton, and 5D2 Princeton.  For a downloadable pot cross-reference for Fender tweed models, click here.
INCLUDES NUT & WASHER 
Part #P-FBF-1MA-RS
$4.95  


Click on photo for
larger view
POT - Fender™ BIAS POT 10K LINEAR, SCREW
Original Fender™ 10K linear, screw, bias potentiometer.  Used in blonde, brownface and blackface models primarily.   Does not have a center tap, so it is not applicable to silverface models unless the bias circuit has been restored to the blackface design. Original Fender™ part # 0017502000.    Includes lock washer, smooth washer and nut.
Part #P-BPF-10KL
$4.95  

New Style:

Old Style:

Click on photo for
larger view
POT - Fender™ BIAS POT 25K LINEAR, SCREW
New style Fender™ 25K linear bias potentiometer.  Used in the reissue 59 Bassman, reissue Hot Rod Deluxe/Deville, reissue Blues Deluxe/Deville.  Fender™ part # 0027873000.   This pot is a drop-in replacement for the original discontinued "blue" bias pot.

Part #FBP-AP25KL
$2.95  


Click on photo for
larger view
MULTI-TURN TRIM POT, 50K Ohms, TOP ADJUSTMENT SCREW.  This 3/8" X 3/8" X 1/8" pot may be used to modify some amplifiers and install a bias adjust control.    50k Ohms, 0.5 watts, 25 turns. This is the pot most often used to add adjustable bias to the Fender Blues Junior.
Instructions for the Blues Junior Bias Mod are found here.
Part #3296W-B50K
$2.79  


Click on photo for
larger view
POT - SNAP-IN, 25K LINEAR, Used In Blues Junior (middle Control) And Similar Amps. Fender™ Part Number 0049402000 And 0049621000.

Part #FPBJ-25KL
$9.95  


Click on photo for
larger view
POT - SNAP-IN, 50K AUDIO, Used In Princeton 65, 65 DSP, and 650 (Normal Volume), Princeton 112 & 112 Plus (Clean Treble & Bass), KXR 60 (2 Volumes), KXR100 (3 Volumes) Frontman 15G & 25R (Normal Volume), Champion 30 & 30 DSP (Volume) Bullet Reverb (Volume) And Similar Amps. Original Fender™ Part Number 00373230049.
Part #FPBJ-50KA
$11.95


Click on photo for
larger view
POT - SNAP-IN, 50K LINEAR, Used In Blues Junior (reverb Control) And Similar Amps. Original Fender™ Part Number 006268000 And 00347190000.

Part #FPBJ-50KL
$9.95  


Click on photo for
larger view
POT - SNAP-IN, 100K 30% REVERSE AUDIO, Used In Princeton 65 (Drive and Drive Ch-Treble) Princeton 112 and 112 Plus (Gain and Drive Ch-Treble), Frontman 15G and 25R (Gain, Drive Volume and Drive Ch-Treble), Champion 30 and 30 DSP (Gain, Drive Volume and Treble) Bullet Reverb (Gain, Drive Volume and Treble) Princeton 65 DSP and 650 (Drive and Drive Ch-Treble) And Similar Amps. Original Fender™ Part Number 00373240000.
Part #FPBJ-100K30C
 

Click on photo for
larger view
POT - SNAP-IN, 100K LINEAR, Used In Acoustasonic Junior (Chorus Rate and Depth), Acoustasonic 30 (Chorus), Princeton 65 and Princeton 650 (Drive Ch. Volume), Bassman 60 (Volume, Bass, Mid, Treble) And Similar Amps. Original Fender™ Part Number 0034720000.
Part #FPBJ-100KL
 

Click on photo for
larger view
POT - SNAP-IN, 250K LINEAR, Used In Blues Junior (bass Control) And Similar Amps. Original Fender™ Part Number 0040985000 and 0040985049.

Part #FPBJ-250KL
$9.95


Click on photo for
larger view
POT - SNAP-IN, 250K AUDIO, Used In Blues Junior (Treble Control), Pro Junior (Volume Control) and similar amps. Fender™ Part Number 0041913000 And 0049622000.

Part #FPBJ-250KA
$9.95  


Click on photo for
larger view
POT - SNAP-IN, 1MEG AUDIO, Used In Blues Junior (volume Control) And Similar Amps. Fender™ Part Number 0049401000.


Part #FPBJ-1MA
$9.95  


Click on photo for
larger view
POT, 1 MEG AUDIO, 11mm, PC MOUNT.  LABELED "A1M".
Found in the Fender™ Champion 600. This pot has 4 pins.  Fender™ part number 0073912049.  Includes mounting nut.
Part #P-VKG-A1M
$6.95  


Click on photo for
larger view
 FENDER STYLE POT, SINGLE GANG - BRACKET MOUNT,  SMOOTH 1/4" SHAFT. 
Found in the Blackface Reissue versions (2000-present) of Deluxe Reverb, Princeton Reverb, Pro Reverb, Super Reverb and Twin Reverb.   Also found in various versions of the Blues Deville, Blues Deluxe, Hot Rod Deville, Hot Rod Deluxe.
POT VALUE REPLACES
FENDER PART #
APPLICATION
A10K 037598
0037598000
MIDDLE CONTROL, 65 REISSUE MODELS:  PRO / SUPER / TWIN
B25K 0041510000 MIDDLE AND REVERB CONTROLS IN HOT ROD DELUXE / DEVILLE AND BLUES DELUXE / DEVILLE
30C25K 0047031000 PRESENCE CONTROL IN HOT ROD DELUXE / DEVILLE AND BLUES DELUXE / DEVILLE
30C50K 037602
0037602000
VIBRATO INTENSITY CONTROL, 65 REISSUE MODELS, 68 CUSTOM MODELS:  DELUXE /  PRO / SUPER / TWIN
A100K 0080527000 MASTER VOLUME CONTROL, HOT ROD DELUXE III / DEVILLE III
B100K 037600
0037600000
REVERB CONTROL, 65 REISSUE MODELS, 68 CUSTOM MODELS::  DELUXE / PRINCETON / PRO /  SUPER / TWIN.   MASTER VOLUME IN BLUES DELUXE REISSUE / BLUES DEVILLE REISSUE
A250K 037597
037599
0037597000
0037599000
0047540000
BASS AND TREBLE CONTROLS, 65 REISSUE MODELS, 68 CUSTOM MODELS:  DELUXE / PRINCETON / PRO / SUPER / TWIN.  VIBRATO INTENSITY CONTROL, PRINCETON REVERB REISSUE.  VOLUME, DRIVE, TREBLE, BASS CONTROLS  IN ORIGINAL HOT ROD DELUXE / DEVILLE AND BLUES DELUXE / DEVILLE
A1M 037596
0037596000
0036966000
VOLUME CONTROLS, 65 REISSUE MODELS, 68 CUSTOM MODELS::  DELUXE / PRINCETON / PRO / SUPER / TWIN.   BASS AND MASTER VOLUME CONTROLS IN ORIGINAL BLUES DELUXE /  DEVILLE.
10C3M
or
RD3M
037601
0037601000(LIMITED SUPPLY)
VIBRATO SPEED CONTROL, 65 REISSUE MODELS, 68 CUSTOM MODELS::  DELUXE / PRINCETON / PRO / SUPER / TWIN

INCLUDES NUT & WASHER  (For spare or replacement nut, order the JN-1016 nut found in this section)
Part #FPHD-XX

$3.95
Select Option:


Quantity:


Click on photo for
larger view
 FENDER STYLE POT, SINGLE GANG, 1/4" D-SHAFT, BRACKET MOUNT.  Used in many Fender solid-state amplifiers from 1990 to the present.  Select Pot Value in Options
POT VALUE REPLACES
FENDER PART #
FOUND IN (AMONG OTHER MODELS)
A2K 0027937000 ROC PRO, DELUXE 112, ULTIMATE CHORUS, PRINCETON CHORUS, DELUXE 85
A50K 0027940000 ROC PRO, DELUXE 112, DELUXE 90, ULTIMATE CHORUS, PRINCETON CHORUS, BXR100, ACOUSTASONIC SFX, BASSMAN 150, DELUXE 85
B50K 0027941000 SUPER CHAMP XD, PRINCETON CHORUS, ULTIMATE CHORUS DSP, STAGE 1000-1600, DELUXE 90, ACOUSTASONIC PRO, BASSMAN 150, DELUXE 85
30C50K 0027943000 BASSMAN 150, BASSMAN 250, ACOUSTASONIC PRO, DELUXE 85
B100K 0027945000 BASSMAN 100-200-400-1200, BXR200, 400 PRO, DELUXE 90, DELUXE 85
30C100K 0027947000 STAGE 100-160-1000-1600, PRINCETON CHORUS DSP, DELUXE 90-900, ULTIMATE CHORUS DSP, DELUXE 85
30C250K 0027949000 STAGE 100-160-1000-1600, PRINCETON CHORUS DSP, DELUXE 90-900-90DSP, ACOUSTASONIC SRX2-PRO

INCLUDES NUT & WASHER (For spare or replacement nut, order the PNW-16 nut found in this section)
Part #FPHD-DS-XX

$3.95

Select Option:


Quantity:


Click on photo for
larger view
POT, PC MOUNT, 16mm DIAMETER BODY, 7mm DIAMETER THREADED BUSHING, MEDIUM SPLIT KNURLED SHAFT (10mm LONG).  FOUND IN THE FENDER SIDEKICK SERIES AND RUMBLE SERIES AMPS.
Replacement for the knurled shaft pots used in the Sidekick series from the late 1980s, and the Rumble series from the early 2000s.  Also used in a limited number of Frontman series amps - contact us for more information.  Diameter of the body of the pot is slightly smaller than a dime.  Shaft length is 10mm, and shaft is knurled for push-on knobs.   Click on photo for more detail.     

INCLUDES NUT & WASHER  (For spare or replacement nut, order the PNW-16 nut and washer set found here).
Part #P-VM16M-XX
$3.95

Select Option:


Quantity:


Click on photo for
larger view
POT, PC MOUNT, ALPHA 16mm DIAMETER BODY, 7mm DIAMETER THREADED BUSHING, D-SHAFT.    Hard-to-find D-Shaft type.  Available values:  A5K, B5K, B10K, A20K, B20K, A50K, B50K, A100K, B100K, A500K, B500K.  For knobs designed for D-Shaft pots.   Click on photo for more detail.       Download cross-reference guide for these pots.  
INCLUDES NUT & WASHER  (For spare or replacement nut, order the PNW-16 nut found in this section)
Part #P-VDS16-XX
$3.95

Select Option:



Quantity:


Click on photo for
larger view
POTENTIOMETER DUST CAP, for all 16mm (5/8") pots.   Slips over the case of the pot and helps keep out dust and contamination.  Made by Alpha.  Fits all 16mm potentiometers.   Sold individually.   Note:   For single-gang pots only - will not fit dual 16mm pots.
Part #PDC-16
$0.20 each

Quantity:

  Fender™ Potentiometer Sets    


Click on photo for
larger view
Fender™ Potentiometer Sets

Fender potentiometer sets contain all of the potentiometers for a particular amplifier.    Large selection for many models from the 1950s up to the present day.  Most potentiometer sets for amps in the blackface and silverface era offer a choice of metal shafts or nylon shafts.   Many kits for 60s and 70s models include the resistors which are soldered directly to the pots.
Prices starting at $12.95 Click here to see the full selection of Fender potentiometer sets.
Nuts and Washers for Pots    

Click on photo for
larger view
SAVE WITH MULTIPACK!  JNUT-38 JACK NUT AND WASHER, METAL, SWITCHCRAFT, SET OF 6
Genuine Switchcraft™ nut and washer set for the blackface/silverface Fender™ bias pot, Mesa Boogie pots, and the CTS or Alpha pots with 3/8" bushing (found on original vintage Fender™ blackface and silverface), as well as Peavey™ and Switchcraft™ 1/4" jacks.  Does NOT fit the 24mm Marshall™ pots.   Set of 6 washers and 6 nuts. 
Part #JNUT-38-6
$4.50
(Set of 6 washers and 6 nuts)
 

JACK NUT AND WASHER, METAL, SWITCHCRAFT
Genuine Switchcraft™ nut and washer set for the blackface/silverface Fender™ bias pot, Mesa Boogie pots, and the CTS or Alpha pots with 3/8" bushing (found on original vintage Fender™ blackface and silverface), as well as Peavey™ and Switchcraft™ 1/4" jacks.  Does NOT fit the 24mm Marshall™ pots.  
Part #JNUT-38
$0.89
(Set of 1 washer and 1 nut)
 


Click on photo for
larger view
JACK LOCK WASHER, METAL
Replacement lock washer for all Alpha pots with 3/8" bushing and Mesa Boogie pots, as well as Switchcraft 1/4" jacks.
Part #W-38
$0.49  


Click on photo for
larger view
POT NUT, METAL, 8MM
Replacement nut for the Fender™ bracket mount pots with smooth 1/4" shafts (FPHD-xxxx), such as used on the Hot Rod Deluxe/Deville, Blues Deluxe/Deville.    Also fits the substitute replacement pots for Marshall™ 24mm with silver-colored threaded bushings, and our P-VA-XX pots.  Metric threads M8x.075 zinc plated.
Part #JN-1016
$0.39  


Click on photo for
larger view
POTENTIOMETER NUT AND WASHER, METAL
Replacement nut and washer for the Fender™ bracket mount pots with D shafts (FPHD-xxxx-DS).   Fits the Peavey Bracket Potentiometers (P-VBxxxx) and the Peavey spider pots (P-VSxxxx).   Also fits the Marshall™ style 16mm pots (P-Vxxxx-M16 and P-Vxxxx-M16S).   Metric threads M7x.075 zinc plated.
Part #PNW-16
$0.45  


Strat™, Stratocaster™, Esquire™, Telecaster™, Tele™, Jazzmaster™, Jaguar™, Mustang™, P.Bass™, J.Bass™ and Fender™ are registered trademarks of Fender™ Musical Instruments. The replacement necks and bodies are for a Fender™ or Squier™ by Fender™ guitar or bass. The distinctive headstock designs and the distinctive body designs of the Stratocaster™, Telecaster™, J.Bass™, P.Bass™ and Tele™ Bass are registered trademarks of Fender™ Musical Instruments Co.  
Peavey™ is a registered trademark of Peavey™ Electronics Corporation.
Marshall™ is a registered trademark of Marshall™ Amplification Plc.
Mesa Boogie™ is a registered trademark of MESA/Boogie™ Ltd.
AmpRepairParts.com and Studio Sound Electronics are not affiliated with these companies.
All company names, logos and product names mentioned on these pages are trademarks of their respective owners.

Copyright ©2024 Studio Sound Electronics - All Rights Reserved
Not responsible for web site errors or omissions.
  WARNING: These products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov