Foot Switches Boxes
 



Click on photo for
larger view

ORIGINAL FenderŪ FOOTSWITCH - CHROME
Original FenderŪ vintage two-button footswitch found on 60's and 70's blackface and silverface amps with vibrato and reverb.  Sturdy chrome metal construction.    Dual RCA Plugs, 12 ft cable.  
FenderŪ part # 0994051000
Part #FBS-241
$38.95  


Click on photo for
larger view

ORIGINAL STYLE FenderŪ FOOTSWITCH - BLACK
Original FenderŪ vintage two-button footswitch found on 60's and 70's blackface and silverface amps with vibrato and reverb.  Sturdy black metal construction.    Dual RCA Plugs, 12 ft cable.  
Replaces FenderŪ part # 0994051000
Part #FBS-241B
$43.95  


Click on photo for
larger view

ORIGINAL FenderŪ FOOTSWITCH - CHROME - VIB/FAT for VIBRO-KING
Original FenderŪ vintage two-button footswitch found on the mid 1990s Fender Custom Shop Vibro-King.   Switches for Vibrato and Fat.   Sturdy chrome metal construction.    Single right-angle 1/4" Plug, 12 ft cable.  
FenderŪ part # 0994059000, or 041273.
Part #FBS-459
$46.95  


Click on photo for
larger view

ORIGINAL FenderŪ FOOTSWITCH - CHROME - VIB/CHA for DUAL PROFESSIONAL
Original FenderŪ vintage two-button footswitch found on the mid 1990s Fender Custom Shop Dual Professional.   Switches for Vibrato and Channel.   Sturdy chrome metal construction.    Single right-angle 1/4" Plug, 12 ft cable.  
FenderŪ part # 0994060000, or 048868.
Part #FBS-460
$46.95  


Click on photo for
larger view

FenderŪ RCA VIBRATO SHORTING PLUG   Did you know that on vintage FenderŪ amps (Blackface, Silverface), the reverb will work without a footswitch plugged in, but the vibrato will not?   This handy-dandy little RCA shorting plug will fix that problem, if you don't own or prefer not to use a footswitch on your vintage 60s or 70s FenderŪ amp.   Just plug this little RCA plug gadget into the vibrato footswitch jack on the back panel, and your vibrato will come alive.    Turn the intensity knob to zero to cut out the vibrato when this plug is inserted.  Note:  Does not apply to Vibro Champ, Princeton, or Princeton Reverb amps.  Inserting this plug turns the vibrato off in those models, removing the plug turns it on.
Part #FSP-100
$1.99  


Click on photo for
 larger view
ž" VIBRATO SHORTING PLUG   Did you know that on medium to large 65 reissue FenderŪ amps ('65 Deluxe Reverb Reissue, '65 Super Reverb Reissue, and the '65 Twin Reverb Reissue), the reverb will work without a footswitch plugged in, but the vibrato will not?   This handy-dandy ž" shorting plug will fix that problem, if you do not own or prefer not to use a footswitch on your '65 reissue FenderŪ amp.   Just plug this little plug gadget into the footswitch jack on the back panel, and your vibrato will come alive.    Turn the intensity knob to zero to cut out the vibrato when this plug is inserted.  Note:  Does not apply to the '65 Princeton Reverb Reissue amps, as this plug is not required for vibrato to function in the Princeton Reverb. 
Part #FSP-305
$5.99  


Click on photo for
larger view

ORIGINAL FenderŪ FOOTSWITCH - CHROME
Original FenderŪ vintage one-button footswitch found on 60's and 70's blackface and silverface amps requiring a single footswitch (usually for reverb only).  Sturdy chrome metal construction.    Single RCA Plug, 12 ft cable.  
Original FenderŪ part # 0994050000.
Part #FBS-230
$34.95  


Click on photo for
larger view

Revisit™ FenderŪ STYLE FOOTSWITCH - CHROME
Aftermarket replacement for the original FenderŪ two-button footswitch found on 60's and 70's blackface and silverface amps with vibrato and reverb.  Sturdy chrome metal construction.    Dual RCA Plugs, 16 ft cable.   Replaces FenderŪ part number 0994051000
Part #FBS-271
$27.95  


Click on photo for
larger view

FenderŪ STYLE FOOTSWITCH - CHROME - FOR THE '65 REISSUE DELUXE REVERB, '63 REISSUE VIBROVERB, CUSTOM VIBROLUX AND '65 REISSUE TWIN REVERB   Aftermarket replacement for the FenderŪ two-button footswitch found on the new Deluxe Reverb, Twin Reverb, Vibroverb, and Custom Vibrolux reissue blackface amps with vibrato and reverb.  Sturdy chrome metal construction.    Stereo right-angle 1/4" plug, 16 ft cable.   Replaces FenderŪ part number 0994058000.
Part #FBS-281
$35.95  



Click on photo for
larger view

Revisit™ FenderŪ STYLE FOOTSWITCH - BLACK
Aftermarket replacement for the original FenderŪ two-button footswitch found on 60's and 70's blackface and silverface amps with vibrato and reverb.  Sturdy black metal construction.    Dual RCA Plugs, 16 ft cable.
Part #FBS-271-B
$28.95  


Click on photo for
larger view

FenderŪ STYLE FOOTSWITCH - BLACK - FOR THE '65 REISSUE DELUXE REVERB, '65 REISSUE SUPER REVERB AND '65 REISSUE TWIN REVERB   Aftermarket replacement for the FenderŪ two-button footswitch found on the new Deluxe Reverb and Twin Reverb reissue blackface amps with vibrato and reverb.  Sturdy black metal construction.    Stereo right-angle 1/4" plug, 16 ft cable.  
Part #FBS-281-B
$36.95  


Click on photo for
larger view

ORIGINAL FenderŪ Footswitch Box

Restore your contemporary Fender amp’s footswitch functionality with a genuine replacement Fender footswitch.

• Features ž" plug and 12 ft cable
• Used for FM 65 DSP, Super Champ™ XD, Champion™ 40 and Champion 100 amplifiers

FenderŪ part # 0071359000
Part #FBS-277
$27.95  


Click on photo for
larger view

FenderŪ STYLE FOOTSWITCH
Aftermarket replacement for the original FenderŪ one-button footswitch found on smaller vintage blackface and silverface amps.   Sturdy chrome metal construction.    Single RCA Plug.
Part #FBS-270
$24.95  


Click on photo for
larger view

Genuine FenderŪ Footswitch
Restore your contemporary FenderŪ amp’s footswitch functionality with a genuine replacement Fender footswitch.
Features ž" plug and 12' cable.  Black body, with FenderŪ logo.   Used for Mustang™ I, Mustang II, FM Series and Blues Junior™ amplifiers.  FenderŪ part number 0994049000.
Part #FBS-274
$21.95  


Click on photo for
larger view

FenderŪ STYLE FOOTSWITCH
Aftermarket replacement for the FenderŪ one-button "Fat" footswitch found on the FenderŪ Blues Junior.   Sturdy chrome metal construction.    Right angle 1/4" plug.   Replaces FenderŪ part number
0994054000.
Part #FBS-291
$32.95  




Click on photo for
larger view

MUSIC MAN STYLE FOOTSWITCH - BLACK
Revisit™ aftermarket replacement for the original Music Man two-button footswitch found on original Music Man amplifiers.  Labeled for vibrato and reverb, but may be used on other models for phaser / reverb, distortion, etc.  Sturdy black metal construction.    Dual RCA Plugs, 12 ft cable.    Music Man amps require special grounding of the footswitch case to prevent hum in the reverb circuit, and this switch employs that additional grounding.
Part #FBS-251
$33.95  


Click on photo for
larger view

MarshallŪ STYLE FOOTSWITCH
Revisit™ aftermarket replacement for the original MarshallŪ footswitch - same quality, just without the MarshallŪ logo and MarshallŪ price tag.  Sturdy metal construction.    Mono 1/4" Plug, 16 ft. cable.   Standard design - footswitch operation shorts the tip to the sleeve - will work with other makes and models of amplifiers as well as MarshallŪ.   Replaces MarshallŪ stock numbers P801 and PEDL-00008.   Works with the MarshallŪ models 1962, 8040, 2555, 2550, 2558, 2553, 2554.   JTM60 models:  JTM600-610-615-612-622.   JCM600 models 600-601-602.   JCM900 models 2100-2500-2501-2101-2502.   JTM30 models 310-312.   DBS models 7200-7400-72410-72115.  Rackmount amps 9100-9200.   MG Series I model G50RCD.    IBS models 3520-5522-3540.
Part #FBS-470
$20.95  


Click on photo for
larger view

MarshallŪ STYLE FOOTSWITCH W/LED  Revisit™ aftermarket replacement for the original MarshallŪ footswitch - same quality, just without the MarshallŪ logo and MarshallŪ price tag.  Sturdy metal construction.  Replaces MarshallŪ stock numbers PED801 and PEDL-00001.   Fits the MarshallŪ DSL100, DSL201 and DSL50, and the ValveState models VS65R and VS30R.   Also the MG Series I model G30RCD. 

Also works with the Crate VC3112 Vintage Club 30 and Crate VC5112 Vintage Club 50.   Mono 1/4" Plug, 16 ft. cable.   LED indicates condition of switch.  Can be rewired internally to work with other amplifiers.    Click here for wiring diagram.   NOTE:   Will not work with many amplifiers, even those that used LED's on the original footswitch, without rewiring.   Electronics background suggested.    Also - will generally NOT work with amplifiers which did not have an LED indicator on the original footswitch.
Part #FBS-470L

$21.95  


Click on photo for
larger view

MarshallŪ STYLE DUAL FOOTSWITCH
Revisit™ aftermarket replacement for the original MarshallŪ dual footswitch - same quality, just without the MarshallŪ logo and MarshallŪ price tag.  Sturdy metal construction.  Standard design - operation of one of the footswitches shorts the tip to the sleeve, while the other switch shorts the ring to the sleeve.  Latching switches.   Replaces MarshallŪ stock number P802, P803, P804, P805, PEDL-00009, PEDL-00010, PEDL-00015, PEDL-00017.   Fits the MarshallŪ JCM900 series:  4100-4500-4101-4501-4102-4502.   The JCM800 series 2210-2205-4210-4212-4211.   The ValveState series:  8080-8100-8200-8280-8240.   The MG Series 1: G80RCD-G100RCD.   The Acoustic Soloist:  AS80R.

Can work with other makes and models of amplifiers as well as MarshallŪ - commonly used on most models of Trace Elliot guitar amps (not the bass amps, however).   Also used on GibsonŪ Goldtone amplifiers, and Framus Ruby I, Ruby II, CS, and Red Rogue models.   1/4" Stereo plug, 16 ft. cable.    Will also work on the Fender 1990s and 2000s Reissue 65 Twin-Super-Deluxe-Princeton Reverb amps.
Part #FBS-471

$24.95  


Click on photo for
larger view

MarshallŪ STYLE DUAL FOOTSWITCH W/LED  Revisit™ aftermarket replacement for the original MarshallŪ footswitch - same quality, just without the MarshallŪ logo and MarshallŪ price tag.  Sturdy metal construction.   Replaces MarshallŪ stock number PED802, PED802A, PEDL-00013, PEDL-00016.  Fits the MarshallŪ DSL401, VS100R, VS102R, VS100RH, VS230R, VS232R.

Also works with the Crate BV120H Blue Voodoo 120 Head.  Stereo 1/4" Plug, 16 ft. cable.   LEDs indicate condition of switches.  Can be rewired internally to work with other amplifiers.    Click here for wiring diagram.    NOTE:   Will not work with many amplifiers, even those that used LED's on the original footswitch, without rewiring.   Electronics background suggested.    Also - will generally NOT work with amplifiers which did not have LED indicators on the original footswitch.
Part #FBS-471L

$26.95  


Click on photo for
larger view

MarshallŪ STYLE TRIPLE FOOTSWITCH W/LED   Revisit™ aftermarket replacement for the original MarshallŪ footswitch - same quality, just without the MarshallŪ logo and MarshallŪ price tag.  Equivalent to the MarshallŪ PED-803 and the MarshallŪ PEDL-10014.  Sturdy metal construction.   Fits only the MarshallŪ VS265.   Connector is a 5-pin DIN plug, 16 ft. cable.   LEDs indicate condition of switches.  Click here for wiring diagram.    Will not work with amplifiers other than the MarshallŪ ValveState VS265R. 
Part #FBS-473L
$36.95  

Copyright Đ2017 Studio Sound Electronics - All Rights Reserved
Not responsible for web site errors or omissions