Guitar Amp Handles



Click on photo for
larger view
Revisit™ AMP HANDLE, VINTAGE LEATHER-LOOK STYLE, BLACK WITH BLACK STITCHING
Good replacement for Ampeg, Mesa Boogie, Randall®, Bogner, Ashdown, Rivera, Blackstar, many others.    Handle length is 8 9/16 inches (8.57"), center-to-center mounting distance is 7 3/8 inches (7.38")   Black with black stitching, nickel mounts.   More details   Mounting screws not included - use SC-402 screw pack.
Part #AH-281
$11.95


Click on photo for
larger view
Revisit™ AMP HANDLE, VINTAGE LEATHER-LOOK STYLE, DARK BROWN WITH BROWN STITCHING
Good replacement for Ampeg, Mesa Boogie, Randall®, Bogner, Ashdown, Rivera, Blackstar, many others.    Handle length is 8 9/16 inches (8.57"), center-to-center mounting distance is 7 3/8 inches (7.38")   Dark brown with brown stitching, nickel mounts.   More details   Mounting screws not included - use SC-402 screw pack.
Part #AH-270
$11.95


Click on photo for
larger view
Revisit™ AMP HANDLE, VINTAGE LEATHER-LOOK STYLE, DARK BROWN WITH WHITE STITCHING
Good replacement for Ampeg, Mesa Boogie, Randall®, Bogner, Ashdown, Rivera, Blackstar, many others.    Handle length is 8 9/16 inches (8.57"), center-to-center mounting distance is 7 3/8 inches (7.38")   Dark brown with white stitching, nickel mounts.   More details   Mounting screws not included - use SC-402 screw pack.
Part #AH-318
$11.95


Click on photo for
larger view
Revisit™ AMP HANDLE, VINTAGE LEATHER-LOOK STYLE, DEEP NAVY BLUE-GREY WITH WHITE STITCHING
Good replacement for Ampeg, Mesa Boogie, Randall®, Bogner, Ashdown, Rivera, Blackstar, many others.    Handle length is 8 9/16 inches (8.57"), center-to-center mounting distance is 7 3/8 inches (7.38")   Dark navy blue-grey with white stitching, nickel mounts.   More details   Mounting screws not included - use SC-402 screw pack.
Part #AH-319
$11.95



Click on photo for
larger view
Revisit™ BLACK GUITAR AMP HANDLE, WITH HARDWARE Rugged rubber black handle strap, steel reinforced.  Black metal caps.   Black 10-32 screws and  T-Nut mounting hardware are included.  Handle strap is 7/8" wide.   Designed for screw holes set 8 1/4 to 8 3/8 inches apart.   Total length of handle when properly mounted is 10 1/4".  
Part #GAH-271B
$7.99  



Click on photo for
larger view
Revisit™ GUITAR AMP HANDLE - BLACK.  Rugged rubber black handle strap, steel reinforced.  Black metal caps.   Screws not included - recommend using our SC-403B 10-32 type screws along with a 10-32 T-Nut for secure mounting.   If used on a Marshall® , recommend the SC-404B black-top M5x0.8 metric screws.  Handle strap is 7/8" wide.   Designed for screw holes set 8 1/4 to 8 3/8 inches apart.   Total length of handle when properly mounted is 10 1/4".   Makes a good economical replacement for black strap/black end cap large Marshall® handles (JCM900, JCM2000, JVM, larger ValveState, some later JCM800's)  
Part #GAH-1
$6.99  




Click on photo for
larger view
Orange® AMP BLACK GUITAR AMP HANDLE Black rubber handle strap, metal reinforced.  Black rubber caps.   Screws not included - recommend using the SC-403B black 10-32 type screws along with a 10-32 T-Nut for secure mounting.   See diagram for handle dimensions and center-center screw distance.    Fits most Orange Amplifiers.


Part #OAH-456
 

$7.99  


Click on photo for
larger view

BLACK HANDLE SCREWS
Pack of 2 stainless-steel handle screws finished in satin black for use with black end-cap handles, such as our GAH-1, OAH-456 or GAH-271B.  1" Long, 10-32 threads, finished in satin black to match black end caps.   Designed to work with a 10-32 T-Nut, in cabinet wood of 3/4" or less.    Will not work with external nut - must be a T-Nut.   Will not work with cabinet wood thicker than 3/4".   See Data Sheet here
Part #SC-403B
$0.99
(for a pack of 2 screws)
 


Click on photo for
larger view

'BLACK TOP' METRIC HANDLE SCREWS
Pack of 2 stainless-steel flat-top countersunk handle screws for use with black end-cap handles on Marshall® amps, such as our GAH-1.  Set of 2 Flat-head counter-sunk Phillips, M5 x 0.8, length 25 mm, head only is finished in satin black to match black end caps.  For use only on Marshall® amps with original factory T-Nuts for mounting handle.
Part #SC-404B
$2.29
(for a pack of 2 screws)
 



Click on photo for
larger view
GENUINE PEAVEY CHROME/BLACK GUITAR AMP HANDLEBlack handle strap, metal reinforced.  Chrome metal caps.   Screws and T-Nuts are included.   Handle strap is 7/8" wide.   Designed for screw holes set 7 inches apart.   Total length of handle when properly mounted is 9 inches. 
Part #PAH-302
$7.99  



Click on photo for
larger view
Revisit™ CHROME/BLACK GUITAR AMP HANDLE - CHROME, WITH HARDWARE.  Rugged rubber black handle strap, steel reinforced.  Chrome metal caps.   10-32 screws and  T-Nut mounting hardware are included. Handle strap is 7/8" wide.   Designed for screw holes set 8 1/4 inches apart.   Total length of handle when properly mounted is 10 1/4".  Not recommended for Fender, as the screws are set too far apart for Fender® amp specifications.
Part #GAH-271C
$7.99  


Click on photo for
larger view
ORIGINAL Fender® GUITAR AMP HANDLE.  Black amplifier handle with vinyl sleeve over steel strap and one-screw mounting nickel-plated end caps.   Includes mounting hardware (two screws and T-nuts).  Introduced on  Blackface™-era Fender® amplifiers.  Used on '65 Twin Reverb®, '65 Deluxe Reverb®, '65 Super Reverb®, '65 Princeton Reverb®, '64 Vibroverb Custom, Custom Vibrolux®, Vibro-King® 212 Enclosure, Blues Junior™, Pro Junior™, Acoustasonic™ Jr. DSP, Acoustasonic 30, Acoustasonic SFX II, Bassman® 25, Bassman 60, Jazzmaster Ultralight™ Enclosure, Princeton 650™, Cyber Champ™, Rumble™ 112, Rumble 2x8, Super-Sonic™ 100 Head, Super-Sonic Twin, Super Champ™ X2/XD, and Bullet 15 DSP amplifier.  Fits most vintage and modern amplifiers.  7 3/4"  center to center screw placement. 9 1/4" handle length without end caps.   Original Fender® part number 0990947000.  
Part #FAH-332
$13.99  


Click on photo for
larger view
REPRODUCTION OF Fender® GUITAR AMP HANDLEBlack handle strap, metal reinforced.  Chrome metal caps - replacement for vintage and reissue Fender® amps.   Handle strap is 7/8" wide.   Designed for screw holes set 7 3/4" inches apart.  Looks similar to the original Fender® part number 0990947000.    Screws and T-Nuts included.
Part #FAH-261
$8.99  


Click on photo for
larger view
REPRODUCTION OF Fender® (OR PEAVEY) GUITAR AMP HANDLEBlack handle strap, metal reinforced.  Chrome metal caps - replacement for vintage and reissue Fender® amps and Peavey amps.   Handle strap is 7/8" wide.   Designed for screw holes set 7 3/4 inches apart.  Looks similar to the original Fender® part number 0990947000.    Mounting hardware NOT included.
Part #FAH-262
$5.99  


Click on photo for
larger view
ORIGINAL 4-SCREW Fender® GUITAR AMP HANDLEBlack handle strap, metal reinforced, with chrome end caps - two screws in each end cap.  Used on Cyber Twin, Cyber Twin SE, Cyber Deluxe, Stage™ series, Deluxe 90 DSP/900, Ultimate Chorus™, Princeton 65 DSP, '65 Twin Custom®, '94 (Evil) Twin®, "The Twin", Deluxe VM, Bandmaster VM Head, Steel King, and Bassman® 300 amplifiers  Includes mounting screws and nuts.  Fender® part number 0990948000.  8" center to center. 9 ¼" handle length without end caps.  Also fits Music Man heads and combo amps.
Part #FAH-264
$14.99  


Click on photo for
larger view

Fender® VINTAGE HANDLE SCREWS
Pack of 2 stainless steel handle screws for Fender® style FAH-332, FAH-261 or FAH-262 handle.   1" Long, 10-32 threads.   Designed to work with a 10-32 T-Nut, in cabinet wood of 3/4" or less.    Will not work with external nut - must be a T-Nut.   Will not work with cabinet wood thicker than 3/4".  See Data Sheet here
Part #SC-403
$0.99
(for a pack of 2 screws)
 


Click on photos for
larger view


(Assembled)
 
Marshall® HANDLE
Genuine Marshall® Handle for modern heads and combo amps.  
Found primarily on JCM900, JCM2000, larger Valvestate, and JVM series amps, along with some later JCM800.   Original Marshall® part number M-PACK-00031.
Kit contains:
  • (2) Countersunk screws - M5 x 0.8, overall length of 25 mm
  • (2) Mounting brackets
  • (2) Black bracket covers with Marshall® logo
  • (1) Rubber handle with metallic insert
  • Center-to-center screw mounting distance is 8 3/8" (213mm). 
  • Overall length of assembled and mounted handle is 10¼" (260mm).
  • Original replacement screws are the SC-404 screws, below

Part #MAH-294

$16.99  


Click on photo for
larger view

Marshall® METRIC HANDLE SCREWS
Pack of 2 metric handle screws for Marshall®   MAH-294 handle.   Original Marshall® , designed to work with the OEM metric T-Nuts.   Set of 2 Flat-head counter-sunk Phillips,  M5 x 0.8, length 25 mm.   Found primarily on JCM900, JCM2000, larger Valvestate, and JVM series amps, along with some later JCM800.
Part #SC-404
$1.99
(for a pack of 2 Marshall® metric screws)
 



Click on photos for
larger view

VINTAGE Revisit™ REISSUE GOLD/BLACK HANDLE - Marshall® JCM-800 style
Marshall® Handle for vintage heads and combo amps.   Used on some early JCM800 series.    Kit contains:
  • (2) Mounting brackets
  • (2) Gold bracket covers
  • (1) Rubber handle strap with metallic insert
  • Center-to-center screw mounting distance is 9 inches between the inside two screws, and 10 inches between the outside two screws.
  • Overall length of assembled and mounted handle is 11¼" (286mm).
  • Mounting screws and T-Nuts are included

Part #MAH-287

$16.99  



Click on photos for
larger view

VINTAGE Revisit™ REISSUE GOLD/BLACK HANDLE REPLACEMENT STRAP - Marshall® JCM-800 style
The strap part only of handle part number MAH-287.   Used on some early Marshall
® JCM800 series amps.

Part #MHS-295

$10.95




Click on photos for
larger view

VINTAGE Revisit™ REISSUE GOLD HANDLE END CAP - Marshall® JCM-800 style
One end cap only of handle part number MAH-287.   Used on some early Marshall
® JCM800 series amps.   Sold individually.

Part #MHC-295

$1.95
(for one end cap)

Quantity:



Click on photos for
larger view

VINTAGE Revisit™ REISSUE GOLD HANDLE INTERNAL CLAMP - Marshall® JCM-800 style
One internal clamp only of handle part number MAH-287.   Used on some early Marshall
® JCM800 series amps.   Sold individually.

Part #MIC-295

$1.00
(for one clamp)

Quantity:



Click on photos for
larger view

 
VINTAGE Revisit REISSUE GOLD/BLACK HANDLE - JMP, JTM "PLEXI"
Handle for vintage Marshall® heads and combo amps.   Replacement for the original Marshall® JMP, JTM "Plexi" series.    Kit contains:
  • (2) Mounting brackets
  • (2) Gold bracket covers
  • (1) Rubber handle strap with metallic insert
  • Center-to-center screw mounting distance is 9 1/2" (241mm). 
  • Overall length of assembled and mounted handle is 10.7" (272mm).
  • Mounting screws are NOT included

Part #MAH-288

$16.99  



Click on photo for
larger view
Premium-quality steel T-nuts feature three razor-sharp teeth and 10-32 fine thread.  Works with all 10-32 screws - recommended for mounting many guitar amp handles.   Pack of 4 nuts.
Part TNUT-1032
$1.39
(pack of 4)
 



Click on photo for
larger view
Premium-quality steel T-nuts feature six razor-sharp teeth and extra-long barrels.  10-32 fine thread. The result is a T-nut that goes in straighter and holds tighter than ordinary T-nuts. As a bonus, the 6-prong design ensures that your T-nut will stay in place even when working at the edge of a driver hole. We guarantee that these are the finest T-nuts that you will find on the market. Recommended hole size is 1/4", thread is 10-32.     Pack of 4 nuts.
Part TNUT-6
$1.59
(pack of 4)
 


(Black)

Click on photo for
larger view
Vox® STYLE GUITAR AMP HANDLEBlack handle strap, "dogbone" style, diamond pattern, with brackets. Chrome end hooks - replacement for vintage and modern Vox® amps.  Does not contain Vox® logo, so it may be used on other brands of amps.  Center to center measurement is 6 1/4 inches.  Color of handle strap is black.   Screws not included - you might consider the pack of four SC-402 screws found here.   Note that some vintage Vox® amps may have used a different thread type than the 8-32 thread of the SC-402 screws.
Part #VAH-327
$5.99  


(Brown)

Click on photo for
larger view
Fender® STYLE GUITAR AMP HANDLEBrown handle strap, "dogbone" style. Chrome end hooks - replacement for vintage and modern Fender® amps.   Replacement for Fender® part number 0990946000.   Does not contain Fender® logo, so it may be used on other brands of amps.  Used on vintage and modern brownface and blonde tolex amps such as the 59 Bassman, Hot Rod Deluxe, Blues Deluxe, Blues Deville, Super-Sonic etc.   Color of handle strap is brown.   Screws not included - order the pack of four SC-402 screws found here.
Part #FAH-328
$6.99  


(Black)

Click on photo for
larger view
Fender® STYLE GUITAR AMP HANDLEBlack handle strap, "dogbone" style. Chrome end hooks - replacement for vintage and modern Fender® amps.   Replacement for Fender® part number 0990943000.   Does not contain Fender® logo, so it may be used on other brands of amps.  Used on vintage and modern black tolex amps such as the Hot Rod Deville, Blues Deluxe, Blues Deville, Super-Sonic, etc.   Color of handle strap is black.   Screws not included - order the pack of four SC-402 screws found here.
Part #FAH-329
$6.99  


Click on photo for
larger view

Fender® "DOGBONE" HANDLE SCREWS
Pack of 4 chrome "Dogbone" handle screws for Fender® style FAH-328 and FAH-329 handles.   Fits the handle on the Fender® Hot Rod Deluxe, Hot Rod Deville, Blues Deluxe, and Blues Deville, as well as other Fender® amps of similar design.  Also works with Hiwatt handles and other British design amp handles.
Part #SC-402
$1.59
(for a pack of 4 screws)
 



Click on photo for
larger view
Premium-quality steel T-nuts feature three razor-sharp teeth and 8-32 fine thread.  Works with all 8-32 screws - recommended for mounting many guitar amp handles.   Pack of 4 nuts.
Part TNUT-832
$1.39
(pack of 4)
 




Click on photo for
larger view
Fender® STYLE GUITAR AMP HANDLE, RAISED, BROWN STITCHED LEATHER-LOOK VINTAGEBrown handle strap, replacement for Fender® "tweed" style amps (as well as other vintage amps.  Has slight "raised" bump near the center of the handle.   Brown, stitched in white.   6.5 inches from mounting center to mounting center.   Comes complete with two nickel-plated handle mounts and four screws with T-nuts.   Perfect for restoring that vintage amp in your closet!
Part #GAH-282
$14.99  


Click on photo for
larger view
PEAVEY CORD WRAP BRACKET.   There must be a gazillion different Peavey amps with these cord wrap brackets on the back. Very handy, as many Peavey amps had some rather long hard-wired non-removable cords. But when they break after many years' use, they're kind of useless. Replace them now with the original bracket.
(Bracket measures 2.45" horizontally. Mount measures .935" horizontally, and .941" vertically. Length of cylindrical shaft is .175" and the diameter is .19".)  Original Peavey part # 70900029.
Part #CW-119
$3.59
(each)
 


Copyright ©2017 Studio Sound Electronics - All Rights Reserved
Not responsible for web site errors or omissions