Marshall™
Corners & Handles

We carry a complete selection of Marshall™ Amplifier parts for both vintage and modern amps.

Back to Marshall™ Amp Parts Index



Click on photo for
larger view
Marshall™ CORNERS, FRONT OF CABINET  
Front corner set, ¾" radius. Includes 12 gold rivets for attaching to cabinet.  For heads, combos and straight speaker cabinets.   Will not fit slanted speaker cabinets, such as the 1960A.  For slanted cabinets, see the MC-1092 set.

Part #MC-1091
$10.95
(For a set of 4 corners with 12 rivets)

Click on photo for
larger view
Revisit Quality  Reproduction of Marshall™ CORNERS, FRONT OF CABINET  
Front corner set, 3/4" radius. Includes 12 gold rivets for attaching to cabinet.  For Marshall™ heads, combos and straight speaker cabinets.  Replace your Marshall™ corners with quality parts at 25% less than Marshall™ prices.   Will not fit slanted speaker cabinets, such as the 1960A.  For slanted cabinets, see the MC-1092 set.

Part #RC-1091
$7.95
(For a set of 4 corners with 12 rivets)
 


Click on photo for
larger view
Marshall™ SPECIAL CORNERS, FRONT OF SLANTED SPEAKER CABINETS
Front corner set, ¾" radius. Includes 12 gold rivets for attaching to cabinet.   Two top angled corners for the left and right top corners of angled speaker cabinets, and two straight corners for the bottom front corners.  For slanted speaker cabinets ONLY, such as the 1960A, MG412AG, MX412A
Part #MC-1092
$16.95
(For a set of 4 corners with 12 rivets)

Click on photo for
larger view
Marshall™ CORNERS, REAR OF CABINET  
Rear corner set, 3/4" radius. Includes 16 gold rivets for attaching to cabinet.  For heads, combos and speaker cabinets.  

Part #MC-1090
$11.95
(For a set of 4 corners with 16 rivets)


Click on photo for
larger view
Revisit Quality  Reproduction of Marshall™ Corners, Rear of Cabinet  Rear corner set, 3/4" radius. Includes 16 gold rivets for attaching to cabinet.  For Marshall™ heads, combos and speaker cabinets.   Replace your Marshall™ corners with quality parts at 25% less than Marshall™ prices.

Part #RC-1090
$8.95
(For a set of 4 rear corners with 16 rivets)
 


Click on photo for
larger view
Marshall™ GOLD RIVETS
For attaching Marshall™ corners to cabinets.  Gold, package of 12 rivets.
Part #MR-109
$4.95
(For a set of 12 gold rivets)


Click on photo for
larger view
Marshall™ SILVER RIVETS
For attaching Marshall™ corners to cabinets.  Silver, package of 12 rivets.
Part #MR-109S
$4.95
(For a set of 12 silver rivets)


Click on photo for
larger view
MARSHALL™ HANDLE STRAP FOR JCM900, JCM2000, ETC HEAD.  Original Marshall™ handle strap for the MAH-294 Handle. Sold individually.  Includes metal strap insert and rubber strap.   Genuine Marshall.    Found primarily on JCM900, JCM2000, larger ValveState, and JVM series amps. Save money by replacing only the worn strap!  Ends and clamps not included.
Part #MHS-294
$7.95
(each)


Click on photo for
larger view
MARSHALL™ END CAPS FOR MAH-294 HANDLE.  Handle end caps for the MAH-294 Handle. Sold in sets of two caps.   NOTE:  DOES NOT HAVE THE MARSHALL LOGO ON THE CAPS.   Found primarily on JCM900, JCM2000, larger ValveState, and JVM series amps.  Save money by replacing only the parts the handle needs!  Strap, screws and clamps not included.   Set of two end caps.
Part #MHC-294-2
$4.95
(for a set of 2 end caps)


Click on photo for
larger view
MARSHALL™ INTERNAL END CLAMPS FOR MAH-294 HANDLE.  Handle internal clamps for the MAH-294 Handle. Sold in sets of two end clamps.   Genuine Marshall.   Found primarily on JCM900, JCM2000, larger ValveState, and JVM series amps.  Save money by replacing only the parts the handle needs!  Strap, black end caps, screws and strap not included.   Note:  These are unfinished metal caps - designed to be used only with the snap-on MHC-294-2 end caps.  Set of two end clamps.
Part #MIC-294-2
$2.99
(for a set of 2 end clamps)


Click on photo for
larger view

Marshall™ METRIC HANDLE SCREWS
Pack of 2 metric handle screws for Marshall™   MAH-294 handle.   Original Marshall™ , designed to work with the OEM metric T-Nuts.   Set of 2 Flat-head counter-sunk Phillips,  M5 x 0.8, length 25 mm.   Found primarily on JCM900, JCM2000, larger Valvestate, and JVM series amps.
Part #SC-404
$1.99
(for a pack of 2 Marshall™ metric screws)
 


Click on photos for
larger view


(Assembled)

Marshall™ HANDLE
Genuine Marshall™ Handle for modern heads and combo amps.   Used primarily on JCM900, JCM2000, larger ValveState, and JVM series amps.  Original Marshall™ part number M-PACK-00031.    Kit contains:

  • (2) Countersunk screws - M5 x 0.8, overall length of 25 mm

  • (2) Mounting brackets
  • (2) Black bracket covers with Marshall™ logo
  • (1) Rubber handle with metallic insert
  • Center-to-center screw mounting distance is 8 3/8" (213mm). 
  • Overall length of assembled and mounted handle is 101/4" (260mm).
  • Replacement screws are the Marshall™ SC-404 screws, below

Part #MAH-294

$21.95

 



Click on photos for
larger view


(Assembled)
Marshall™ AFTERMARKET HANDLE
Identical to the Genuine Marshall™ Handle MAH-294, except does not have the "Marshall" name imprinted on the end caps.   Save compared to the price of the original Marshall™ handle.  For modern heads and combo amps.   Used primarily on JCM900, JCM2000, larger ValveState, and JVM series amps.  Replaces Original Marshall™ part number M-PACK-00031 or stock number MAH-294.    Kit contains:
  • (2) Countersunk screws - M5 x 0.8, overall length of 25 mm
  • (2) Mounting brackets
  • (2) Black bracket covers (no Marshall™ logo)
  • (1) Rubber handle with metallic insert
  • Center-to-center screw mounting distance is 8 3/8" (213mm). 
  • Overall length of assembled and mounted handle is 101/4" (260mm).
  • Replacement screws are the Marshall™ SC-404 screws, below

Part #RAH-294

$15.99  


Click on photo for
larger view

Marshall™ METRIC HANDLE SCREWS
Pack of 2 metric handle screws for Marshall™   MAH-294 handle.   Original Marshall™ , designed to work with the OEM metric T-Nuts.   Set of 2 Flat-head counter-sunk Phillips,  M5 x 0.8, length 25 mm.   Found primarily on JCM900, JCM2000, larger Valvestate, and JVM series amps.
Part #SC-404
$1.99
(for a pack of 2 Marshall™ metric screws)
 



Click on photos for
larger view

VINTAGE Revisit™ REISSUE GOLD/BLACK HANDLE - Marshall™ JCM-800 style
Marshall™ Handle for vintage heads and combo amps.   Used on some early JCM800 series.    Kit contains:
  • (2) Mounting brackets
  • (2) Gold bracket covers
  • (1) Rubber handle strap with metallic insert
  • Center-to-center screw mounting distance is 9 inches between the inside two screws, and 10 inches between the outside two screws.
  • Overall length of assembled and mounted handle is 11-1/4" (286mm).
  • Mounting screws are included.

Part #MAH-287

$18.99  



Click on photos for
larger view

VINTAGE Revisit™ REISSUE SILVER/BLACK HANDLE - Marshall™ JCM-800 style
Marshall™ Handle for vintage heads and combo amps.   Used on some early JCM800 series.    Kit contains:
  • (2) Mounting brackets
  • (2) Silver color bracket covers
  • (1) Rubber handle strap with metallic insert, silver ends
  • Center-to-center screw mounting distance is 9 inches between the inside two screws, and 10 inches between the outside two screws.
  • Overall length of assembled and mounted handle is 11-1/4" (286mm).
  • Mounting screws are included.

Part #MAH-355

$18.99



Click on photos for
larger view

VINTAGE Revisit™ REISSUE GOLD/BLACK HANDLE REPLACEMENT STRAP - Marshall™ JCM-800 style
The strap part only of handle part number MAH-287.   Used on some early Marshall
JCM800 series amps.  11 inches, end-to-end.

Part #MHS-295

$11.95




Click on photos for
larger view

VINTAGE Revisit™ REISSUE GOLD HANDLE END CAP - Marshall™ JCM-800 style
One end cap only of handle part number MAH-287.   Used on some early Marshall
JCM800 series amps.   Sold individually.    Note:   We urge you to also replace the MIC-295 internal clamp at the same time.   These end caps may not lock securely on old internal clamps, making the end caps randomly pop off when lifting the amp by its handle.

Part #MHC-295

$1.95
(for one end cap)

Quantity:



Click on photos for
larger view

VINTAGE Revisit™ REISSUE HANDLE INTERNAL CLAMP - Marshall™ JCM-800 style
One internal clamp only of handle part numbers MAH-287 or MAH-355.   Used on some early Marshall
JCM800 series amps.   Sold individually.

Part #MIC-295

$1.00
(for one clamp)

Quantity:



Click on photos for
larger view

VINTAGE Revisit REISSUE GOLD/BLACK HANDLE - JMP, JTM "PLEXI"
Handle for vintage Marshall™ heads and combo amps.   Replacement for the original Marshall™ JMP, JTM "Plexi" series.    Kit contains:
  • (2) Mounting brackets
  • (2) Gold bracket covers
  • (1) Rubber handle strap with metallic insert
  • Center-to-center screw mounting distance is 9".
  • Overall length of assembled and mounted handle is 10.7" (272mm).
  • Mounting screws are NOT included

Part #MAH-288

$22.95  


Strat™, Stratocaster™, Esquire™, Telecaster™, Tele™, Jazzmaster™, Jaguar™, Mustang™, P.Bass™, J.Bass™ and Fender™ are registered trademarks of Fender™ Musical Instruments. The replacement necks and bodies are for a Fender™ or Squier™ by Fender™ guitar or bass. The distinctive headstock designs and the distinctive body designs of the Stratocaster™, Telecaster™, J.Bass™, P.Bass™ and Tele™ Bass are registered trademarks of Fender™ Musical Instruments Co.  
Peavey™ is a registered trademark of Peavey™ Electronics Corporation.
Marshall™ is a registered trademark of Marshall™ Amplification Plc.
Mesa Boogie™ is a registered trademark of MESA/Boogie™ Ltd.
AmpRepairParts.com and Studio Sound Electronics are not affiliated with these companies.
All company names, logos and product names mentioned on these pages are trademarks of their respective owners.

Copyright ©2024 Studio Sound Electronics - All Rights Reserved
Not responsible for web site errors or omissions.
  WARNING: These products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov