Parts for
Orange Amps




Click on photo for
larger view
TUBE RETAINER WITH GRIP TEETH.   Designed For Octal Tubes With Phenolic Base Such As 6L6 Or EL34. Used in many different amplifier brands. 1 1/2" Mounting Centers.
Part #TC-142
$1.95


Click on photo for
larger view
TUBE SHIELD, BAYONET "PUSH AND TWIST" TYPE, ALUMINUM, 1 15/16" TALL.  Includes new base, if needed.  Spring in top of shield which fits over the tube.  Fits 12AX7A and similarly sized preamp tubes. Replacement for Ampeg, Crate and many other brands.   Holes in base spaced 1 1/8" apart.
 
Part #TS-325S
$1.95  


Click on photo for
larger view
TUBE SHIELD, BAYONET "PUSH AND TWIST" TYPE, ALUMINUM, 1 15/16" TALL, SET OF 6.  Includes new bases, if needed.  Spring in top of shield fits over the tube.  Fits 12AX7A and similarly sized preamp tubes. Replacement for Ampeg, Crate, and many other brands.  Holes in base spaced 1 1/8" apart.  
 
Part #TS-325S-6
$8.95  


Click on photo for
larger view
Revisit™ PRE-AMP TUBE DAMPER RINGS.   Use two (or three) of these rings around a pre-amp tube to reduce noise and microphonics.  An economical alternative to more expensive tube dampers.   Will withstand high temperatures of pre-amp tubes, reusable when you change tubes.   Set of 6 rings - will equip either 2 or 3 tubes, depending on the number of rings you choose for each tube.
Part #PTD-6
$2.99
(Set of 6 rings)

 

Click on photo for
larger view

Socket - Belton, Micalex, 8 Pin, Octal PC Mount, Long Lead Micalex, PC mount, long leads (Belton) - MB/MT. 1 ½" mounting centers 1 ¼" chassis hole. Applicable for use with all types of electric and electronic equipment using vacuum tubes.  Paddle saddle mounting, easy mount with the saddle of extruded screw hole.   Phosphorous bronze pin terminal with tin plating, glass fiber field PPS Insulating material
Part # TS-8-209

$3.50
 


Click on photo for
larger view
PHENOLIC TUBE SOCKET FOR OCTAL TUBES.  EXACT REPLACEMENT FOR VINTAGE FENDER, VINTAGE Marshall® (including the JCM900 Series), and many others.    Fits 6L6, EL34, 6V6 output tubes, and 5U4, 5Y3, and GZ34 rectifier tubes.   For 1" to 1 1/8" hole.  Top mounting (mounted from the outside of the chassis), mounting holes spaced 1 1/2" apart.
Part #TS-8-600
$2.99


Click on photo for
larger view
FENDER® STYLE MICALEX TUBE SOCKET FOR MINIATURE 9-PIN TUBES.  INCLUDES INTEGRAL BASE FOR TWIST-LOCK TUBE SHIELD.        Fits 12AX7, 12AU7, 12AT7, etc.   Sturdy Micalex construction, for 3/4"  hole.  Solder tabs for wire connections.   Top mounting (mounted from the outside of the chassis), mounting holes spaced 1 1/8" apart.   Designed to work with the TS-325S tube shield, or vintage tube shields.   
Part #TS-9-700
$2.69


Click on photo for
larger view
Ground Connection Terminals - Flat
Used to connect a ground wire to a screw and nut on a chassis.  Flat, with one hole for wire.   With built-in lock washer to keep the screw and nut from loosening.   Designed for a #8 size screw.   Pack of 10 terminals.

Part #2310915
$1.99
(Pack of 10 terminals)

 


Click on photo for
larger view
ISOLATION WASHER - 3/8"

3/8" outside diameter neoprene bonded flat washer. Perfect for bolting speakers to cabinets. It will securely hold the speaker in place and stop any rattling. For use with #6 and #8 screws.  Set of 4 washers.

Part #SIW-38-4

$0.59
(For a set of 4 washers)


Click on photo for
larger view
BLACK PAN-HEAD WOOD SCREWS, #8 X 1/2", PACK OF 10.   Used In Amplifiers, Speaker Cabinets, Automotive.
Part #BWS8-5
$0.89
(pack of 10)
 


Click on photo for
larger view
BLACK PAN-HEAD WOOD SCREWS, #8 X 3/4", PACK OF 10.   Used In Amplifiers, Speaker Cabinets, Automotive.
Part #BWS8-75
$0.95
(pack of 10)
 


Click on photo for
larger view
BLACK PAN-HEAD WOOD SCREWS, #8 X 1", PACK OF 10.   Used In Amplifiers, Speaker Cabinets, Automotive.
Part #BWS8-1
$1.05
(pack of 10)
 


Click on photo for
larger view
BLACK PAN-HEAD WOOD SCREWS, #8 X 1 1/2", PACK OF 10.  Used In Amplifiers, Speaker Cabinets, Automotive.
Part #BWS8-15
$1.19
(pack of 10)



Click on photo for
larger view
STAINLESS STEEL CHASSIS SCREWS WITH WASHERS, Orange® METRIC
Replacements for the standard M6 metric screws used to hold the chassis in virtually every Orange® head.  Washers included.   Package of 4 stainless steel screws, with 4 washers.  

Part #MCB-4
$2.99
(Set of 4 screws w/washers)
 


Click on photo for
larger view
SMALL BLACK RUBBER FEET, SET OF 4.  
This heavy-duty rubber foot offers a sure grip on all types of surfaces. Ideal for smaller amps, amp heads, or speaker cabinets. The integral metal washer in the mounting hole helps prevent mounting screw "break-through" and adds overall durability.  Just under 1 inch - 15/16" diameter at the top, rounded down to 5/8" diameter at the bottom, and 3/8" tall.    Screws not included.    Set of 4 feet.
Part #BRF-723
$3.95
(pack of 4)
 


Click on photo for
larger view
MEDIUM BLACK RUBBER FEET, SET OF 4.  
This heavy-duty rubber foot offers a sure grip on all types of surfaces. Ideal for large rack cabinets or speaker cabinets. The integral metal washer in the mounting hole helps prevent mounting screw "break-through" and adds overall durability. 1" diameter x 1" tall. Mounting screws not included.

Part #BRF-1691
$4.95
(pack of 4)
 


Click on photo for
larger view
MEDIUM BLACK RUBBER FEET, SET OF 4.  
This heavy-duty rubber foot offers a sure grip on all types of surfaces. Ideal for amp heads, combo amps, or smaller speaker cabinets. The integral metal washer in the mounting hole helps prevent mounting screw "break-through" and adds overall durability. 1" diameter x 5/8" tall. Mounting screws not included.
Part #BRF-1692
$4.95
(pack of 4)
 


Click on photo for
larger view
MEDIUM BLACK RUBBER FEET, SET OF 4.   Tapered: 1 3/16" Diameter At Small End, 1 1/4" Diameter At Large End. 1/2" Tall. Black Rubber With Metal Insert. Used To Support Effects, Amps, Mixers. Mounting Screws Not Included.
Part #BRF-9112
$4.95
(pack of 4)
 


Click on photo for
larger view
X-LARGE BLACK RUBBER FEET, SET OF 4.   Tapered -  1 5/8" Diameter At Large End, 1 1/4" At Small End. 3/4" Tall. Black Rubber With Metal Insert. Used To Support Amp Heads, Speaker Cabinets. Mounting Screws Not Included.
Part #BRF-9107
$7.95
(pack of 4)
 


Click on photo for
larger view
ORANGE® CORNERS, BLACK PLASTIC, SET OF 4.  4 corner set, ¾" radius, 2 pins on front.   Used on some vintage Orange® amps.  For heads, combos and straight speaker cabinets.    Screws NOT included.  Use CN-304-8 nails or SC-411-8 black screws to attach.
Part #VC-2050
$5.95
(For a set of 4 corners)
 


Click on photo for
larger view
POT, ORANGE™, PC MOUNT, 16mm DIAMETER BODY, 7mm DIAMETER THREADED BUSHING, KNURLED SHAFT
Used in many modern Orange™ amp models including the AD30, Rockerverb, Dual Terror, Tiny Terror, TH30, Rocker 30, Thunderverb, and others.  Diameter of the body of the pot is slightly smaller than a dime.  Click on photo for more detail.  Select Pot Value in Options.
INCLUDES NUT & WASHER  (For spare or replacement nut, order the JN-1018 nut found in this section)
Part #P-VOR-XX
$3.95
 

Select Option:


Quantity:


Click on photo for
larger view
POT, ORANGE™, 1 MEG OHM X2 LINEAR DUAL, (B1M), PC MOUNT, 6 MOUNTING PINS, 16mm DIAMETER BODY, 7mm DIAMETER  THREADED BUSHING, MEDIUM SHAFT.
Used in many amp models with PC board circuitry.   Diameter of the body of the pot is slightly smaller than a dime. 
   Exact replacement for the volume control pots (both channels) on the Orange Dual Terror, AD30, and AD140   INCLUDES NUT & WASHER  (For spare or replacement nut, order the JN-1018 nut found in this section)
Part #P-V1MBX2-M16M
$6.95

Quantity:


Click on photo for
larger view
REPRODUCTION OF THE DUNLOP MXR KNOB, BLACK KNOB WITH WHITE LINE
Good replica of the
Dunlop MXR Knob - as used on the Phase 90 and other MXR pedals.   Also a good replacement for knobs on most Orange Amps.  1" diameter x 0.6" high.  Set Screw.
Part #K-345
$1.99  


Click on photo for
larger view
REPRODUCTION OF THE MINI MXR KNOB, BLACK KNOB WITH WHITE LINE
Reproduction of the small MXR Knob.   Also works great as a replacement on many Orange Amps.  Diameter (bottom): 20mm, Height: 11.45mm
With Set Screw.    Datasheet

Part #K-829
$1.99  


Click on photo for
larger view
Revisit™ AMP HANDLE, VINTAGE LEATHER-LOOK STYLE, DARK BROWN WITH BROWN STITCHING
Good replacement for Ampeg, Mesa Boogie, Randall®, Bogner, Ashdown, Rivera, Blackstar, many others.    Handle length is 8 9/16 inches (8.57"), center-to-center mounting distance is 7 3/8 inches (7.38")   Dark brown with brown stitching, nickel mounts.   More details   Mounting screws not included - use SC-402 screw pack.
Part #AH-270
$11.95


ORANGE (AMBER)

Click on photo for
 larger view
PILOT LAMP ASSEMBLY, ORANGE/AMBER, REPLACEMENT FOR ORANGE®
Complete pilot lamp assembly:  Includes pilot lamp holder, amber jewel and #47 bulb complete, fits 11/16" chassis hole.   Designed for 6.3 volts. Ready for installation and wiring.
Part #FLA-124A
$6.95  


ORAGNE (AMBER)

Click on photo for
 larger view
REPLACEMENT PILOT LAMP JEWEL, Orange®, Fender®, Peavey®, Mesa Boogie®, MANY OTHERS.  Amber / Orange color.
Part #JL-115A
$2.99  



Click on photo for
 larger view
PILOT LAMP HOLDER, REPLACEMENT FOR ORANGE®
Pilot lamp holder, fits 11/16" Chassis Hole
Bezel inner diameter: 0.570" Bezel inner diameter (including threading): 0.527"    Works with a standard bayonet lamp such as the 6.3V #47 lamp.   Accepts all of the colored jewels on this page.

Part #LH-124
$2.95  



Click on photo for
 larger view
PILOT LAMP HOLDER, REPLACEMENT FOR MANY BRANDS.
Lamp holder. Relampable front panel indicator accepts a variety of T-2 and T-3 1/4 miniature bayonet lamps. 11/16" chassis hole.  Accepts all of the colored jewels on this page.     Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs) Rating: 125V, 75W

Part #LH-110
$5.49  


Click on photo for
larger view
JACK, 1/4", STEREO INPUT, CLOSED CIRCUIT, PC MOUNT, BRITISH STYLE, EXTRA-TALL LEGS.   6 pins, PC mount, with nut and washer.  Note extended straight pins as shown in photo, causing the jack to sit about 1/8" above the PC board.  Used as the output jack on the Orange DT30.  Guitar input jack on the Orange Terror Bass.
Part #J-504SL
$3.95  


Click on photo for
larger view
JACK, 1/4", MONO INPUT, CLOSED CIRCUIT, PC MOUNT, GENUINE CLIFF UK, STRAIGHT LEG (NOT L-LEG!)
Common input jack found in some "boutique" and independent brand amps, as well as Marshall® , B52®, Trace Ellio®, Orange®, etc.  NOT used in Crate®, Ampeg®. 4 PC board terminals.  Chrome nut has male threads, jack has female threads.  Leads from jack come straight down from the contacts to go into the PC board.   With nut and washer.
Part #J-580
$3.99  


Click on photo for
larger view
JACK, 1/4", STEREO INPUT, CLOSED CIRCUIT, PC MOUNT, GENUINE CLIFF UK, STRAIGHT LEG (NOT L-LEG!)
Common input jack found in some "boutique" and independent brand amps, as well as Marshall® , B52®, Trace Elliot®, Orange®, and Dunlop®/MXR products.  NOT used in Crate®, Ampeg® (see J-581L for those).   6 PC board terminals.  Chrome nut has male threads, jack has female threads.  Leads from jack come straight down from the contacts to go into the PC board.   With nut and washer.
Part #J-581
$4.49  


Click on photo for
larger view
JACK NUT/FERULE, CHROME, with BLACK PLASTIC BEZEL/WASHER - GENUINE CLIFF UK
Replacement nut and bezel washer for the J-501, J-501S, J-580, J-581, J-580L and J-581L jacks.   Note:   The threads on this nut are coarse (3/8-20), and are for genuine Cliff jacks.   Note:  There are some generic jacks on the market with finer thread nuts.   This nut will not fit those jacks.   This nut is for genuine Cliff UK jacks.   Bezel is included with this nut.
Part #JN-200W
$0.79  




Click on photo for
larger view
Orange® AMP BLACK GUITAR AMP HANDLEBlack rubber handle strap, metal reinforced.  Black rubber caps.   Screws not included - recommend using the SC-403B black 10-32 type screws along with a 10-32 T-Nut for secure mounting.   See diagram for handle dimensions and center-center screw distance.    Fits most Orange Amplifiers.


Part #OAH-456
 

$7.99  


Click on photo for
larger view

BLACK HANDLE SCREWS
Pack of 2 stainless-steel handle screws finished in satin black for use with black end-cap handles, such as our GAH-1, OAH-456, or GAH-271B.  1" Long, 10-32 threads, finished in satin black to match black end caps.   Designed to work with a 10-32 T-Nut, in cabinet wood of 3/4" or less.    Will not work with external nut - must be a T-Nut.   Will not work with cabinet wood thicker than 3/4".   See Data Sheet here
Part #SC-403B
$0.99
(for a pack of 2 screws)
 


Click on photo for
larger view
FUSE HOLDER -  Egnater®, Orange®, Trace Elliot®, other brands - GMA OR GDC TYPE FUSE (5mm X 20mm)

Fuse holder found in many models of  Egnater®, Orange® and Trace Elliot® amplifiers.   Designed for the 5mm x 20mm mini glass fuse (GMA or GDC type).  PC Board mounted.  
Part #PTF-50
$3.95


Click on photo for
larger view
FUSE HOLDER -  Panel mounted - GMA or GDC TYPE FUSE (5mm x 20mm)

Fuse holder found in many styles of European guitar amplifiers, power amps and effects units.  Panel mounted, suitable for .187" quick connects or solder connections.   Uses GMA or GDC type mini fuses 5mm x 20mm.  Fuse cap is removed and inserted with flat screwdriver.   Replacement fuse cap is the FH-204.   Cap is included with the holder.   See data sheet here

Part #FH-8
20
$4.99


Click on photo for
larger view
IEC POWER CONNECTOR, FUSED, WIRED TYPE, SNAP-IN ATTACHMENT TO PANEL.
Popular IEC type AC connector found in many Orange® amplifiers.   Designed to snap into  1.25" x 1.10" rectangular panel hole.   Uses GMA type fuses (5mm x 20mm).   Space for spare fuse.   Rated up to 10 amps.   Fuse not included.
Part #P-S2-120-3
$3.95  



Click on photo for
larger view
Revisit™ SPEAKER HARNESS COMPLETE WITH GENUINE SWITCHCRAFT #11 JACK and 24" SPEAKER WIRE FOR SINGLE SPEAKER.  Preassembled for speaker cabinets with one speaker.  Includes Switchcraft #11 jack, and 24 inch Teflon™-insulated 18 ga speaker wire terminated in 3/16" push-on speaker connectors. For two-speaker cabinets, see the SCH-2411X2, below.
Part #SCH-2411
$8.99
 



Click on photo for
larger view
Revisit™ SPEAKER HARNESS COMPLETE WITH GENUINE SWITCHCRAFT #11 JACK and 24" SPEAKER WIRE FOR TWO SPEAKER CABINET.  Preassembled for speaker cabinets with two speakers in parallel.  Includes Switchcraft #11 jack, and 24 inch Teflon™-insulated 18 ga speaker wire terminated in 3/16" push-on speaker connectors, plus an additional 24" jumper cable.
Part #SCH-2411X2
$14.99
 



Click on photo for
larger view
Revisit™ SPEAKER HARNESS COMPLETE WITH 1/4" STRAIGHT PLUG and 24" SPEAKER WIRE FOR SINGLE SPEAKER. Preassembled for combo amps with one speaker.  Includes 1/4" straight plug, and 24 inch Teflon™-insulated 18 ga speaker wire terminated in 3/16" push-on speaker connectors.  For 2-speaker cabinets, add the SJ-150 jumper, below.
Part #SCH-224
$9.99
 



Click on photo for
larger view
Revisit™ SPEAKER HARNESS COMPLETE WITH 1/4" RIGHT-ANGLE PLUG and 24" SPEAKER WIRE FOR SINGLE SPEAKER. Preassembled for combo amps with one speaker.  Includes 1/4" right-angle plug, and 24 inch Teflon™-insulated 18 ga speaker wire terminated in 3/16" push-on speaker connectors.   For 2-speaker cabinets, add the SJ-150 jumper, below.
Part #SCH-287
$9.99
 



Click on photo for
 larger view
Revisit™ SPEAKER JUMPER CABLE
Teflon™ insulated silver plated copper speaker wire, 18 gauge, twisted pair, black and white.   Terminated at each end in standard 3/16" speaker fast-on connectors.   Great for connecting speakers in parallel in 2x12 or 4x12 cabinets.   24 inches (61 cm) long.   Made in USA.
Part #SJ-150
$5.99  


Click on photo for
larger view
JACK PLATE, BLACK METAL, SINGLE 1/4" JACK, 2" OUTSIDE DIAMETER. Similar in style to vintage Fender® jack plates.  Works well with the Switchcraft J-11 1/4" jacks that we carry. Hole is 3/8", for most Switchcraft type jacks.  Easy to install, economical.   Jack not included - order separately.  For size specifications, click here.
Part #JP-180
$1.39



Click on photo for
larger view
Revisit™ JACK PLATE COMPLETE WITH SWITCHCRAFT #11 JACK.  Switchcraft #11 jack preinstalled with lock washer and trim washer.   Outside diameter 2 inches (51mm). Designed to fit flush against a 1 1/8" (29mm) cabinet hole.    Easy to install - drill 1 1/8" hole in cabinet, attach speaker wiring to jack and speaker, attach plate to cabinet.
Part #JPC-180
$3.95
 



Click on photo for
larger view
Revisit™ JACK PLATE COMPLETE WITH GENUINE SWITCHCRAFT #11 JACK and 24" SPEAKER WIRE.  Preassembled - includes 2" diameter single jack mounting plate with Switchcraft #11 jack preinstalled with lock washer and trim washer, and 24 inch Teflon™-insulated 18 ga speaker wire terminated in 3/16" push-on speaker connectors. Outside jack plate diameter 2 inches (51mm). Designed to fit flush against a 1 1/8" (29mm) cabinet hole.    Easy to install - drill 1 1/8" hole in cabinet, attach speaker wiring to speaker, attach plate to cabinet.   For two-speaker cabinets, see the JPH-182, below.
Part #JPH-180
$10.95
 



Click on photo for
larger view
Revisit™ JACK PLATE COMPLETE WITH GENUINE SWITCHCRAFT #11 JACK and 24" SPEAKER WIRE, PLUS ADDITIONAL 24" JUMPER.  Preassembled - includes 2" diameter single jack mounting plate with Switchcraft #11 jack preinstalled with lock washer and trim washer, and 24 inch Teflon™-insulated 18 ga speaker wire terminated in 3/16" push-on speaker connectors. Outside jack plate diameter 2 inches (51mm). Designed to fit flush against a 1 1/8" (29mm) cabinet hole.  Includes a second 24 inch Teflon™-insulated 18 ga speaker wire terminated in 3/16" push-on speaker connectors to connect to a second speaker in the same cabinet.   Easy to install - drill 1 1/8" hole in cabinet, attach speaker wiring to speakers, attach plate to cabinet.
Part #JPH-182
$15.95
 


Click on photo for
larger view
Revisit™ 6 ft POWER CORD, DETACHABLE, 3-WIRE, 18ga, 6 ft LONG, IEC CONNECTOR AT EQUIPMENT END.  COMMON REPLACEMENT CORD FOR MANY GUITAR AMPS, POWER AMPS, EFFECTS UNITS, ETC.   Standard NEMA 5-15 plug for North American use at 110-120 Volts AC.    IEC connector at equipment end.   Used only in North America.
Part #PC-300
$5.95  


Click on photo for
larger view
Revisit™ 10 ft POWER CORD, DETACHABLE, 3-WIRE, 18ga, 10 ft LONG, IEC CONNECTOR AT EQUIPMENT END.   Replacement Cord For Many Guitar Amps, Power Amps, Effects Units, Etc. 10 Ft Length Give Extra Flexibility In Equipment Placement, Reduces Use Of Extension Cords.   Standard NEMA 5-15 plug for North American use at 110-120 Volts AC.    IEC connector at equipment end.   Used only in North America.
Part #PC-600
$10.95  



Click on photo for
 larger view
Revisit™ SPEAKER HARNESS, 2 ft LONG, PUSH-ON TERMINALS, 16 GAUGE CABLE
Replacement right-angle plug with 24" cable and 3/16" fast-on connectors.    Used to replace speaker cable in many combo amplifiers where the speakers are connected to the amplifier chassis via a 1/4" jack and plug.   Heavy-duty 16ga round black speaker cable, right-angle plug and fast-on connectors for attachment to one speaker.  
Part #SCH-7080
$4.50  



Click on photo for
 larger view
Revisit™ SPEAKER HARNESS
Replacement right-angle plug with 34" cable and 3/16" fast-on connectors.    Used to replace speaker cable in most combo amplifiers where the speakers are connected to the amplifier chassis via a 1/4" jack and plug.   18ga black zip cord, right-angle plug and fast-on connectors for attachment to one speaker.  
Part #SCH-280
$5.99  



Click on photo for
 larger view
Revisit™ SPEAKER CABLE - HEAD TO CABINET - 4 FEET LONG
Black 4 feet 16 gauge speaker cable, with one straight 1/4 inch plug and one right-angle 1/4 inch plug.   Used to connect amplifier head to cabinet.

Part #SCH-7028
$4.99  


Click on photo for
 larger view
Revisit™ SPEAKER JUMPER CABLE
Teflon™ insulated silver plated copper speaker wire, 18 gauge, twisted pair, black and white.   Terminated at each end in standard 3/16" speaker fast-on connectors.   Great for connecting speakers in parallel in 2x12 or 4x12 cabinets.   24 inches (61 cm) long.   Made in USA.
Part #SJ-150
$5.99  



Click on photo for larger view

Revisit™ Reverb Tank, 9" long, 3 spring, equivalent to Accutronics 8AB3C1BShort Tank, Medium Decay, input impedance 10 ohms, output 2575 ohms, insulated input and grounded output. Mounts horizontal, open side down.   Found in Orange® Rockerverb.  See explanation of Accutronics reverb tank numbering system here. 

Unlike some tanks, Revisit™ Reverb Tanks include the soft mounting grommets to acoustically decouple the outer channel from the amplifier cabinet.

View the 3-year warranty details here.
Part #8AB3C1B

"Bringing back the sound of vintage Accutronics tanks"

$29.99
In stock
 



Click on photo for
larger view
Rubber mounting grommets for reverb tanks, package of four.   Provides shock absorption for tanks mounted directly to the inside of a wooden amp cabinet.  Mounting Hole Diameter = 3/8"  Outer Diameter = 1/2"
Part #RRG-4
$1.99
(For a pack of 4 grommets
)
 


Click on photo for
larger view

3 foot Revisit™ right angle RCA cables for Reverb Tanks and other electronic devices.  Dual cable, excellent shielding properties, 3 feet long.
Part #RC-173
$3.95
In Stock
 


Click on photo for
larger view

3 foot Extra Heavy-Duty Revisit™ right angle RCA cables for Reverb Tanks and other electronic devices.  Heavy duty thick cable, gold RCA connectors, excellent shielding properties, additional ground conductor provided.
Part #RC-273
$6.95
In stock
 


Click on photo for
larger view

4 foot Revisit™ right angle RCA cables for Reverb Tanks and other electronic devices.  Dual cable, excellent shielding properties, 4 feet long.
Part #RC-174
$4.95
In stock
 


Click on photo for
larger view

4 foot Revisit™ right angle cables for Reverb Tanks.    RCA at one end, stripped cable at opposite end.    For connecting reverb tanks directly to a PC board via a soldered connection at the PC board end.   Used by a number of manufacturers.  Dual cable, excellent shielding properties, 4 feet long.
Part #RC-374
$4.95
In stock
 


Click on photo for
larger view

5 foot Revisit™ right angle RCA cables for Reverb Tanks and other electronic devices.  Dual cable, excellent shielding properties, 5 feet long.
Part #RC-17
5
$5.95
In stock
 



Click on photo for
larger view

6 foot Extra Heavy-Duty Revisit™ right angle RCA cables for Reverb Tanks and other electronic devices.  Heavy duty thick cable, gold RCA connectors, excellent shielding properties, additional ground conductor provided.
Part #RC-27
6
$9.95
In stock
 


Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P.Bass®, J.Bass® and Fender® are registered trademarks of Fender® Musical Instruments. The replacement necks and bodies are for a Fender® or Squier® by Fender® guitar or bass. The distinctive headstock designs and the distinctive body designs of the Stratocaster®, Telecaster®, J.Bass®, P.Bass® and Tele® Bass are registered trademarks of Fender® Musical Instruments Co.  
Peavey® is a registered trademark of Peavey® Electronics Corporation.
Marshall® is a registered trademark of Marshall® Amplification Plc.
Mesa Boogie® is a registered trademark of MESA/Boogie® Ltd.
AmpRepairParts.com and Studio Sound Electronics are not affiliated with these companies.
All company names, logos and product names mentioned on these pages are trademarks of their respective owners.

Copyright ©2017 Studio Sound Electronics - All Rights Reserved
Not responsible for web site errors or omissions