Click on photo for
larger view |
MARSHALL™
SPRUNG FOOT FOR HEADS. Genuine Marshall™
Sprung foot. Sold individually. Screws are included 3 1/4" Long, 2"
Wide, 1" Tall. 2-5/16" Mounting Centers.
Part #MSF-252 |
$8.95
(each) |
|
Click on photo for
larger view |
MARSHALL™ ANTI-SKID TRAY FOR 1960A ANGLED CABINETS. Genuine Marshall™
Anti-Skid Tray. Sold
individually. For the Marshall™ 1960A slant cabinets. Gold rivets are included. 9-7/8" Long, 3" Wide, 1/8" Thick.
With Marshall™
logo.
Part #AST-1960 |
$18.65
(each)These have been on order from Marshall
since September 2023. They do not have them. |
|
Click on photo for
larger view |
MARSHALL™
CASTER CUPS FOR 1960B STRAIGHT CABINETS - SET OF 4. Genuine Marshall™
Caster Cups. Complete set of 4 for one cabinet. Package of 4 includes
16 gold rivets. For the Marshall™ 1960B straight cabinets. 3.9" Long,
2.07" Wide.
Part #MCC-1960 |
$18.95
(Set of 4) |
|
Click on photo for
larger view |
MEDIUM BLACK TAPERED RUBBER FEET, SET OF 4.
This heavy-duty rubber foot offers a sure grip
on all types of surfaces. Ideal for rack-mount amps, combo amps, or small speaker cabinets.
the integral metal washer in the mounting hole helps prevent mounting screw
"break-through" and adds overall durability. 1" diameter
(wide end) x 3/4" diameter (narrow end) x 0.85" tall. Mounting
screws not included. Set of 4 feet. Good replacement for
smaller Marshall amps, the 3203 Artist series, JTM60 series, etc.
Part #BRF-9105
|
$4.95
(pack of 4) |
|
Click on photo for
larger view |
MEDIUM BLACK RUBBER FEET, SET OF 4
This heavy-duty rubber foot offers a sure grip
on all types of surfaces. Replacement for the feet on Marshall heads
from the late 60s and early to mid 70s. The integral metal washer in the mounting hole helps prevent mounting screw
"break-through" and adds overall durability. 1" diameter x 1" tall. Mounting
screws not included.
Part #BRF-1691
|
$4.95
(pack of 4) |
|
Click on photo for
larger view |
MARSHALL™
HANDLE STRAP FOR TSL100 HEAD. Original Marshall™ handle strap for the
MAH-294 Handle. Sold
individually. Includes metal strap insert and rubber strap.
Genuine Marshall. Found primarily on JCM900, JCM2000, larger ValveState, and JVM series amps. Save money by replacing only the worn strap! Ends
and clamps not included.
Part #MHS-294 |
$9.95
(each) |
|
Click on photo for
larger view |
MARSHALL™ END CAPS FOR MAH-294 HANDLE.
Handle end caps for the MAH-294 Handle. Sold in sets of two caps.
NOTE: DOES NOT HAVE THE MARSHALL LOGO ON THE CAPS.
Found primarily on JCM900, JCM2000, larger ValveState, and JVM series amps. Save money by replacing only the parts
the handle needs! Strap, screws and clamps not included. Set
of two end caps.
Part #MHC-294-2 |
$6.95
(for a set of 2 end caps) |
|
Click on photo for
larger view |
MARSHALL™ INTERNAL END CLAMPS FOR MAH-294 HANDLE.
Handle internal clamps for the MAH-294 Handle. Sold in sets of two end clamps.
Genuine Marshall.
Found primarily on JCM900, JCM2000, larger ValveState, and JVM series amps. Save money by replacing only the parts
the handle needs! Strap, black end caps, screws and strap not included. Note:
These are unfinished metal caps - designed to be used only with the
snap-on MHC-294-2 end caps. Set
of two end clamps.
Part #MIC-294-2 |
$4.99
(for a set of 2 end clamps) |
|
Click on photo for
larger view |
Marshall™
METRIC HANDLE SCREWS
Pack of 2 metric handle screws for Marshall™
MAH-294 handle. Original Marshall™ , designed to work with the OEM
metric T-Nuts. Set of 2 Flat-head counter-sunk Phillips,
M5 x 0.8, length 25 mm.
Found primarily on
JCM900, JCM2000, larger Valvestate, and JVM series amps.
Part #SC-404 |
$1.99
(for a pack of 2 Marshall™ metric screws) |
|
Click on photos for
larger view
(Assembled)
|
Marshall™
HANDLE
Genuine Marshall™ Handle for modern heads and combo amps. Used
primarily on JCM900, JCM2000, larger ValveState, and JVM series amps. Original Marshall™ part number M-PACK-00031. Kit contains:
Part #MAH-294
|
$21.95 |
|
Click on photos for
larger view
(Assembled)
|
Marshall™
AFTERMARKET HANDLE
Identical to the Genuine Marshall™ Handle MAH-294, except does not
have the "Marshall" name imprinted on the end caps. Save compared to the price of the original Marshall™ handle. For modern heads and combo amps. Used
primarily on JCM900, JCM2000, larger ValveState, and JVM series amps. Replaces Original Marshall™ part number M-PACK-00031
or stock number MAH-294. Kit contains:
- (2) Countersunk screws - M5 x 0.8, overall
length of 25 mm
- (2) Mounting brackets
- (2) Black bracket covers (no Marshall™
logo)
- (1) Rubber handle with metallic insert
- Center-to-center screw mounting distance
is 8 3/8" (213mm).
- Overall length of assembled and mounted
handle is 101/4" (260mm).
- Replacement screws are the Marshall™ SC-404
screws, below
Part #RAH-294 |
$15.99 |
|
Click on photo for
larger view |
Marshall™
METRIC HANDLE SCREWS
Pack of 2 metric handle screws for Marshall™
MAH-294 handle. Original Marshall™ , designed to work with the OEM
metric T-Nuts. Set of 2 Flat-head counter-sunk Phillips,
M5 x 0.8, length 25 mm.
Found primarily on
JCM900, JCM2000, larger Valvestate, and JVM series amps.
Part #SC-404 |
$1.99
(for a pack of 2 Marshall™ metric screws) |
|
Click on photos for
larger view
|
VINTAGE
Revisit™ REISSUE
GOLD/BLACK HANDLE - Marshall™ JCM-800 style
Marshall™ Handle for vintage heads and combo amps. Used
on some early JCM800 series. Kit contains:
- (2) Mounting brackets
- (2) Gold bracket covers
- (1) Rubber handle strap with metallic insert
- Center-to-center screw mounting distance
is 9 inches between the inside two screws, and 10 inches between the outside
two screws.
- Overall length of assembled and mounted
handle is 11-1/4" (286mm).
- Mounting screws are included.
Part #MAH-287 |
$19.99 |
|
Click on photos for
larger view
|
VINTAGE
Revisit™ REISSUE
SILVER/BLACK HANDLE - Marshall™ JCM-800 style
Marshall™ Handle for vintage heads and combo amps. Used
on some early JCM800 series. Kit contains:
- (2) Mounting brackets
- (2) Silver color bracket covers
- (1) Rubber handle strap with metallic insert,
silver ends
- Center-to-center screw mounting distance
is 9 inches between the inside two screws, and 10 inches between the outside
two screws.
- Overall length of assembled and mounted
handle is 11-1/4" (286mm).
- Mounting screws are included.
Part #MAH-355 |
$19.99 |
|
Click on photos for
larger view
|
VINTAGE
Revisit™ REISSUE
GOLD/BLACK HANDLE REPLACEMENT STRAP - Marshall™ JCM-800 style
The strap part only of handle part number MAH-287. Used on some
early Marshall™
JCM800 series amps. 11 inches, end-to-end.Part #MHS-295 |
$13.95 |
|
Click on photos for
larger view
|
VINTAGE
Revisit™ REISSUE
GOLD HANDLE END CAP - Marshall™ JCM-800 style
One end cap only of handle part number MAH-287. Used on some
early Marshall™
JCM800 series amps. Sold individually. Note:
We urge you to also replace the MIC-295 internal clamp at the same time.
These end caps may not lock securely on old internal clamps, making the end caps
randomly pop off when lifting the amp by its handle.Part #MHC-295 |
$1.95
(for one end cap) |
|
Click on photos for
larger view
|
VINTAGE
Revisit™ REISSUE
HANDLE INTERNAL CLAMP - Marshall™ JCM-800 style
One internal clamp only of handle part numbers MAH-287 or MAH-355. Used on some
early Marshall™
JCM800 series amps. Sold individually.Part #MIC-295 |
$1.60
(for one clamp) |
|
Click on photos for
larger view
|
VINTAGE
Revisit REISSUE GOLD/BLACK HANDLE - JMP, JTM "PLEXI"
Handle for vintage Marshall™ heads and combo amps. Replacement for
the original Marshall™ JMP, JTM "Plexi" series. Kit contains:
- (2) Mounting brackets
- (2) Gold bracket covers
- (1) Rubber handle strap with metallic insert
- Center-to-center screw mounting distance
is 9".
- Overall length of assembled and mounted
handle is 10.7" (272mm).
- Mounting screws are NOT included
Part #MAH-288 |
$23.95 |
|
Click on photo for
larger view |
Marshall™
LOGO, WHITE PLASTIC, 6" LONG
The mini Marshall™ logo - smallest size. As used on the
DSL201 combo, DSL401 combo, some of the smaller sized MG series combos, VS15,
VS30R, 1912 Cab, JCM600, JCM602, AS50, 3005, 4501, 5005, 8010, 8015, MG10,
MG10MKII, MG15RCD, MG30RCD, MG215RCD, TSL602, JCM3005, and some other models.
This logo is 6" long - please measure the old logo in order to ensure that you
order the correct size.
Part #ML-601 |
$38.95 Since
Marshall has new ownership for the past year, Marshall hardware parts are
becoming nearly impossible to replenish. |
Availability date uncertain. Has been on backorder from Marshall since
May, 2023. |
Click on photo for
larger view |
Marshall™ LOGO, WHITE PLASTIC, 9" LONG
- TSL122
The 9 inch long Marshall™ logo - medium size. As used on the
TSL122 combo. This logo is 9" long - please measure the old logo in order to ensure that you
order the correct size.
Part #ML-901 |
$38.95 Since
Marshall has new ownership for the past year, Marshall hardware parts are
becoming nearly impossible to replenish. |
Availability date uncertain. Has been on backorder from Marshall since
May, 2023. |
Click on photo for
larger view |
Marshall™
LOGO, WHITE PLASTIC, 11" LONG
The 11 inch long Marshall™ logo - large size. As used on the 2100,
2205, 2203, 2204, 2210, 2550, 2553, 2554, 2558, 4102, 4001, 4210, 4211, 4212,
4100, 4101, 4103, 4010, 4500, 5213, 5210, 5212, DSL100, 1986, 1960B
cabinet, 1959JMP, 1936, TSL100, 6100, 6101, JCM1959, 2558V, 3005, 2555SL,
AS1960, 2100SLX, TSL60, 1987JCM, DSL50, 3005, 1960AX, and some other models This logo is
11" long - please measure the old logo in order to ensure that you order the
correct size.
Part #ML-1101 |
$39.95 Since
Marshall has new ownership for the past year, Marshall hardware parts are
becoming nearly impossible to replenish. |
Availability date uncertain. Has been on backorder from Marshall since
May, 2023. |
Click on photo for
larger view |
Marshall™
REAR VENT, GOLD MESH, JTM AND JMP SERIES
NOTE: This is NOT the top vent!
This original Marshall vent is for the H-shaped head back panels on the
vintage JMP and JTM amps from the 1960s. Check the measurement on
your back panel - the MV-210 vent measures 16 7/8" x 2 1/4".
Part #MV-210 |
$34.95 |
|
Click on photo for
larger view |
Marshall™
TOP VENT, 8 SCREW OR RIVET HOLES, MOST JCM800 AND JCM900 HEADS
This original Marshall vent is for most JCM800 and JCM900 heads from the
1980s and 1990s. Check the measurement of your existing vent - the MV-211
vent measures 17 5/8" x 3". Rivets/screws not included.
Part #MV-211 |
$13.95 Since
Marshall has new ownership for the past year, Marshall hardware parts are
becoming nearly impossible to replenish. |
Availability date uncertain. Has been on backorder from Marshall since
December, 2023.
|
Click on photo for
larger view |
Marshall™
TOP VENT, POP-IN, FOR CERTAIN VALVESTATE AVT MODELS
This original Marshall vent is for the AVT50, AVT100, and AVT275 heads and
combos. Replaces the plastic vent immediately behind the handle, and
is roughly the size of the handle. Check the measurement of your existing vent - the MV-218
vent measures 10 1/4" x 1 9/16"
Part #MV-218 |
$8.95 |
|
Click on photo for
larger view |
STAINLESS STEEL CHASSIS SCREWS WITH WASHERS, Marshall™ METRIC
Replacements for the standard M6 metric screws used to hold the chassis in
virtually every Marshall™ head. Washers included. Package of 4
stainless steel screws, with 4 washers.
Part #MCB-4 |
$3.99
(Set of 4 screws w/washers) |
|
Click on photo for
larger view |
STAINLESS STEEL
COMBO CHASSIS SCREWS, Marshall™ METRIC (NOT BLACK!) SET OF 4
SCREWS.
Unpainted replacements for the standard M6 metric screws used to hold the chassis in virtually every
larger Marshall™
combo (typically 50 watts & up). Note that these
screws are plain stainless steel - NOT BLACK LIKE the ORIGINALS. You may paint the top
black if you choose. We recommend that you only paint the top - do not
paint the threads. 35mm long, replaces Marshall part number
MESCRW00001. Found in the JTM610, JTM612, JTM612, JTM615, JTM622,
JCM601, JCM602, 2101, 2501, 2502, 4101, 4102, 4501, 4502, TSL601, TSL601, and
TSL122. Set of 4 screws. See the CW-400-4 washer set below for a
set of suitable washers for these screws.
Part #MCS-5140-4 |
$2.29
(Set of 4 screws) |
|
Click on photo for
larger view |
CUP WASHER, STAINLESS STEEL, LARGE, SET OF 4. OD 1/2", ID 3/16"
Typically found on larger combo amp cabinets and 4x12 cabinets, such as
Marshall™ . Set of 4 washers.
Part #CW-400-4 |
$0.99
(for a set of 4 washers) |
|
Click on photo for
larger view |
Marshall™ CHASSIS WASHERS
Replacements for the standard washers used with the MCB-4 chassis screws under virtually every Marshall™
head. Note: Not for Marshall Combo amps.
Also fits Orange and Trace Elliot amps which use chassis bolts to secure the
chassis. Package of 4 washers.
Part #MCW-4 |
$1.99
(Set of 4 washers) |
|
Click on photo for
larger view |
CHASSIS CAGE NUTS, Marshall™ M6 METRIC
Replacements for the standard M6 metric cage nuts used on the chassis in virtually every Marshall™ head. Package of 4 cage nuts. Mates with the MCB-4
or MCS-5140-4 screws, above.
Part #MCN-4 |
$4.59
(Set of 4 nuts) |
|
Click on photo for
larger view |
BACK PANEL STAINLESS STEEL SCREWS
(SET OF 8) FOR CLOSED BACK CABINETS (SUCH AS Marshall™ ). Set
of 8 screws, Stainless Steel, 1 3/4" long, Phillips, oval head. Use with either the
CW-400 or CW-501 cup washers.
Part #SC-400-8 |
$1.99
(for a pack of 8 screws)
|
|
Click on photo for
larger view |
BACK PANEL STAINLESS STEEL SCREWS
(SET OF 17) FOR CLOSED BACK CABINETS (SUCH AS Marshall™, Fender™ Bassman,
Bandmaster, etc ). Set
of 17 screws, Stainless Steel, 1 3/4" long, Phillips, oval head. Use with the
CW-400-17 cup washers. A set of 17 screws completely replaces
all of the screws on most Marshall™ 4x12 cabinets, including the 1960 models.
Part #SC-400-17 |
$3.89
(for a pack of 17 screws)
|
|
Click on photo for
larger view |
CUP WASHER, STAINLESS STEEL, LARGE, SET OF 4. OD 1/2", ID 3/16"
Typically found on larger combo amp cabinets and 4x12 cabinets, such as
Marshall™ . Set of 4 washers.
Part #CW-400-4 |
$0.99
(for a set of 4 washers) |
|
Click on photo for
larger view |
CUP WASHER, STAINLESS STEEL, LARGE, SET OF 8. OD 1/2", ID 3/16"
Typically found on larger combo amp cabinets and 4x12 cabinets, such as
Marshall™ . Set of 8 washers.
Part #CW-400-8 |
$1.95
(for a set of 8 washers) |
|
Click on photo for
larger view |
CUP WASHER, STAINLESS STEEL, LARGE, SET OF 17. OD 1/2", ID 3/16"
Typically found on larger combo amp cabinets and 4x12 cabinets, such as
Marshall™ . Set of 17 washers. Some of the larger Marshall
4x12 cabinets, such as certain model 1960 cabinets, have 17 screws and washers in the back
panel.
Part #CW-400-17 |
$3.79
(for a set of 17 washers) |
|
Click on photo for
larger view |
Marshall™
HEAD BACK PANEL STAINLESS STEEL SCREWS AND WASHERS
(SET OF 4) FOR FULL SIZE HEADS. Set of 4 screws, Stainless Steel, 1 1/2" long, Phillips, oval head, with matching cup washers.
Fits most large Marshall™ heads starting in the 1990s, including the JCM-800,
JCM-900, JCM-2000 and JVM series.
Note: The screw heads in this package have a slight oval shape, as opposed
to many Marshall™ head back panel screws which have a flat head. This oval
shape helps improve the "bite" of the screwdriver, and helps prevent the screw
head from being mangled over time.
Part #MBP-4 |
$1.49
(for a pack of 4 screws and 4 washers)
|
|
Click on photo for
larger view |
Marshall™
SMALL BRASS PAN-HEAD SCREWS WITH LOCK WASHERS AND NUTS (SET OF 6). Set
of 6 screws, brass, 3/8" (9.5mm) long, slotted pan head - head is 5.4mm in diameter, 4-40
thread, with lock washer and nut. Used to mount preamp tube sockets
and impedance selectors in classic Marshall™
amps.
Part #MSBS-6 |
$1.99
(for a pack of 6 screws, 6 lock washers and 6 nuts)
|
|
Click on photo for
larger view |
Marshall™
SMALL BRASS ROUND-HEAD SCREWS WITH LOCK WASHERS AND NUTS (SET OF 6). Set
of 6 screws, brass, 1/2" (12.7mm) long, slotted round head - head is 5.4mm in diameter, 4-40
thread, with lock washer and nut. Used to mount impedance selectors
and IEC power cord connectors in classic Marshall™
amps.
Part #MLBS-6 |
$2.49
(for a pack of 6 screws, 6 lock washers and 6 nuts)
|
|
Click on photo for
larger view |
Marshall™
MEDIUM BRASS ROUND-HEAD SCREWS WITH LOCK WASHERS AND NUTS (SET OF 8). Set
of 8 screws, brass, 3/8" (12.7mm) long, slotted round head - head is 6.1mm in diameter,
6-32
thread, with lock washer and nut. Used to mount power tube sockets,
capacitor cans and ground lugs in classic Marshall™
amps.
Part #MMBS-8 |
$2.99
(for a pack of 8 screws, 8 lock washers and 8 nuts)
|
|
Click on photo for
larger view |
Ground Lug Terminals - Angled
Made from tin-plated brass - will not rust. Used to connect a ground wire to a screw and nut on a chassis.
Angled,
with two holes for soldering wires. With built-in lock washer to keep the screw
and nut from loosening. Designed for a #8 size screw.
Pack of 5 terminals.
Part #GL-113 |
$1.39
(Pack of 5 terminals)
|
|
Click on photo for
larger view |
TERMINAL STRIPS, 6 LUG, SET OF
2. Perfect for amplifier circuit additions or modifications.
Center post for mounting to chassis. All 6 terminals are isolated
from ground. Each terminal strip is 2-5/8 inches
long. The lugs are set on 3/8 inch centers. Each lug
will accept wires up to 16ga - smaller gauge allows multiple wires to be
connected to each lug. Set contains 2 terminal strips as pictured.
Mounting hardware not included.
Part #TS-825 |
$2.99
(for a set of 2 terminal strips) |
|
Click on photo for
larger view |
TERMINAL STRIPS, 7 LUG, SET OF
2. Perfect for amplifier circuit additions or modifications.
End terminals on each strip are the mounting lugs, so they become a ground lug
if attached to a metal chassis. Each terminal strip is 2-5/8 inches
long. The lugs are set on 3/8 inch centers. Each lug
will accept wires up to 16ga - smaller gauge allows multiple wires to be
connected to each lug. Set contains 2 terminal strips as pictured.
Mounting hardware not included.
Part #TS-712 |
$3.69
(for a set of 2 terminal strips) |
|
Click on photo for
larger view |
PC BOARD STANDOFF, NYLON, MARSHALL STYLE This
style of PC board standoff is used in a number of amplifiers. Designed for
a 4.5mm hole in the chassis, and a 2.5mm hole in the PC board. Total
height of standoff is 26.3mm (just over 1 inch). Supports the PC
board at a height of 15.8mm (5/8 inch) above the chassis. Set of 4
standoffs in the kit.
Part #PCS-15 |
$1.99
(for a set of 4 standoffs) |
|
|
CAPACITOR CLAMP, for FT-1616, FT-3232, FT-5050, JJ-5050, or other 1 3/8" diameter can style
capacitors. Part #CC-122 |
$2.50 |
|