|
|
B-52™ Pot
Kits |
|
|
Click on photo for
larger view |
 B-52™ Model AT-100 Potentiometer Kit, 15 Single
Gang Pots.
Front panel replacement Potentiometer Kit for the
B-52™
Model AT-100.Contains 15 single gang
pots for the front panel. Instructions and pot location chart included.
Note: The trim pots for [effects send level and effects return level] and [line
out level] on the rear panel are not included in this kit - only the
front panel pots.
Part #BPK-1 |
$39.95 |
|
|
|
Marshall™ Pot
Kits |
|
|
Click on photo for
larger view |
 Complete Marshall™ Potentiometer Kit, 8 SINGLE GANG POTS
AND 1 DUAL GANG POT.
ORIGINAL Marshall™ REPLACEMENT PARTS. JCM900 2100/2500 SERIES (NOT
SL-X).
Complete replacement Potentiometer Kit for the Marshall™
JCM900 amp models 2100, 2101, 2500, 2501 and 2502 with 8 pots on the front panel and 1
effects level pot on the rear panel.
NOT for the JMP combo model 2100 from the 1970s.
NOT for the 2100SL-X, 2101SL-X, 2500SL-X, 2501SL-X or 2502SL-X - see the
MPK-9 Potentiometer Kit for those SL-X models
Part #MPK-1 |
$24.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit, 10 SINGLE GANG POTS
AND 1 DUAL GANG POT.
ORIGINAL Marshall™ REPLACEMENT PARTS. JCM 900 4100/4500 SERIES.
Complete replacement Potentiometer Kit for the Marshall™
JCM900 amp models
4100, 4101, 4102, 4500, 4501 and 4502 Dual Reverb with 10 pots on the front panel and 1
effects level pot on the rear panel.
Part #MPK-2 |
$29.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
13 SINGLE GANG POTS.
ORIGINAL Marshall™ REPLACEMENT PARTS. VALVESTATE 8080/8100.
Complete replacement Potentiometer Kit for the Marshall™
Valvestate 80V Model 8080 combo and Valvestate 100V model 8100 head with 13 pots on the front panel.
Part #MPK-3 |
$31.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
13 SINGLE GANG POTS and 2 DUAL-GANG POTS.
ORIGINAL Marshall™ REPLACEMENT PARTS. VALVESTATE 8240.
Complete replacement Potentiometer Kit for the Marshall™
Valvestate S80 Model 8240 combo with 15 pots on the front panel.
Part #MPK-4 |
$39.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
15 SINGLE GANG POTS and 2 DUAL-GANG POTS.
ORIGINAL Marshall™ REPLACEMENT PARTS. VALVESTATE 8200/8280.
Complete replacement Potentiometer Kit for the
Marshall™ Valvestate Bi-Chorus 200 Model 8200 head or the Marshall™ Valvestate
Bi-Chorus 200 Model 8280 combo with 17 pots on the front panel.
Part #MPK-5 |
$44.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
8 SINGLE GANG POTS. ORIGINAL Marshall™ REPLACEMENT PARTS.
VALVESTATE 8020.
Complete replacement Potentiometer Kit for the
Marshall™ Valvestate 20 Model 8020 combo with 8 pots on the front panel.
Part #MPK-6 |
$19.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
5 SINGLE GANG POTS. ORIGINAL Marshall™ REPLACEMENT PARTS.
VALVESTATE 8010.
Complete replacement Potentiometer Kit for the
Marshall™ Valvestate 10 Model 8010 combo with 5 pots on the front panel.
Part #MPK-7 |
$12.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
10 SINGLE GANG POTS. ORIGINAL Marshall™ REPLACEMENT PARTS.
VALVESTATE 8040.
Complete replacement Potentiometer Kit for the
Marshall™ Valvestate 40V Model 8040 combo with 10 pots on the front panel.
Part #MPK-8 |
$23.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit, 8 SINGLE GANG POTS
AND 1 DUAL GANG POT.
ORIGINAL Marshall™ REPLACEMENT PARTS. JCM900 SL-X SERIES.
Complete replacement Potentiometer Kit for the Marshall™
JCM900 SL-X amp series, including the models 2100SL-X, 2101SL-X, 2500SL-X, 2501SL-X and 2502SL-X with 8 pots on the front panel and 1
effects level pot on the rear panel.
Part #MPK-9 |
$24.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
17 SINGLE GANG POTS.
ORIGINAL Marshall™ REPLACEMENT PARTS. MARSHALL 30th ANNIVERSARY
6100/6101.
Complete replacement Potentiometer Kit for the Marshall™
30th Anniversary 6100 head and 6101 combo amplifiers with 17 pots on the front panel.
Part #MPK-10 |
$45.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
8 SINGLE GANG POTS. ORIGINAL Marshall™ REPLACEMENT PARTS.
MARSHALL JTM30 SERIES.
Complete replacement Potentiometer Kit for the Marshall™
JTM-30 series amps, including the JTM310 2x10 combo and the
JTM312 1x12 combo. 8 pots on the front panel.
Part #MPK-12 |
$19.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
13 SINGLE GANG POTS AND 3 DUAL GANG POTS. ORIGINAL Marshall™ REPLACEMENT PARTS.
MARSHALL 9001 PREAMP.
Complete replacement Potentiometer Kit for the Marshall™
Model 9001 rack-mount preamp. 14 pots on the front panel, and 2 effects pots on the
rear panel.
Part #MPK-13 |
$45.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
9 SINGLE GANG POTS AND 2 DUAL GANG POTS. ORIGINAL Marshall™ REPLACEMENT PARTS.
MARSHALL 9004 PREAMP.
Complete replacement Potentiometer Kit for the
Marshall™ Model 9004 rack-mount preamp. 11 pots on the front panel.
Part #MPK-14 |
$31.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
11 POTS TOTAL. ORIGINAL Marshall™ REPLACEMENT PARTS.
MARSHALL VS65R.
Complete replacement Potentiometer Kit for the
Marshall™ ValveState Model VS65R. 11 pots on the front panel.
Part #MPK-15 |
$62.95
|
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
15 POTS TOTAL. ORIGINAL Marshall™ REPLACEMENT PARTS.
MARSHALL VS100 AND SIMILAR MODELS.
Complete replacement Potentiometer Kit for the
Marshall™ ValveState Models VS100, VS100R, VS102R, VS100H, and VS100RH. 15 pots on the front panel.
Part #MPK-16 |
$81.95
|
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
14 SINGLE GANG POTS AND 1 DUAL GANG POT. ORIGINAL Marshall™
REPLACEMENT PARTS - MG100HDFX HEAD (NOT THE COMBO)
Complete replacement Potentiometer Kit for the Marshall™
MG100HDFX head with 15 pots on the front panel.
Part #MPK-17 |
$49.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
14 SINGLE GANG POTS AND 1 DUAL GANG POT. ORIGINAL Marshall™
REPLACEMENT PARTS - MG100DFX COMBO (NOT the MG100HDFX HEAD!)
Complete replacement Potentiometer Kit for the Marshall™
MG100DFX combo with 15 pots on the front panel.
Part #MPK-18 |
$49.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
12 SINGLE GANG POTS AND 1 DUAL GANG POT. ORIGINAL Marshall™
REPLACEMENT PARTS - MG250DFX COMBO.
Complete replacement Potentiometer Kit for the Marshall™
MG250DFX combo with 13 pots on the front panel.
Part #MPK-19 |
$46.95 |
|
Click on photo for
larger view |
Complete
Marshall™ Potentiometer Kit, 17 POTS TOTAL. ORIGINAL Marshall™ REPLACEMENT
PARTS. Marshall™ MODEL VS265.
Complete replacement Potentiometer Kit
for the Marshall™ ValveState Model VS265. 17 pots on the front panel.
Part #MPK-20 |
$88.95
|
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
13 POTS TOTAL. ORIGINAL Marshall™ REPLACEMENT PARTS. Marshall™ MODEL
MG50DFX.
Complete replacement Potentiometer Kit for the
Marshall™ Model MG50DFX. 13 pots on the front panel.
Part #MPK-21 |
$45.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
13 POTS TOTAL. ORIGINAL Marshall™ REPLACEMENT PARTS. Marshall™ MODEL
G80RCD or G100RCD.
Complete replacement Potentiometer Kit for the
Marshall™ Model G80RCD or G100RCD. 13 pots on the front panel.
Part #MPK-22 |
$45.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
10 POTS TOTAL. ORIGINAL Marshall™ REPLACEMENT PARTS. Marshall™ MODEL
AVT50.
Complete replacement Potentiometer Kit for the
Marshall™ Model AVT50 in the ValveState 2000 amp series. 10 pots on the front panel.
Part #MPK-23 |
$56.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
10 SINGLE GANG POTS. ORIGINAL Marshall™
REPLACEMENT PARTS - MG30DFX
Complete replacement Potentiometer Kit for the
Marshall™ MG30DFX with 10 pots on the front panel.
Part #MPK-25 |
$25.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
10 POTS TOTAL. ORIGINAL Marshall™ REPLACEMENT PARTS. Marshall™ MODELS
DSL50 or DSL100 in the JCM2000 SERIES.
Complete replacement Potentiometer Kit for the
Marshall™ Model DSL50 or the DSL100 in the JCM2000 amp series. 10 pots on the front panel.
Part #MPK-26 |
$56.95 |
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
9 POTS TOTAL. ORIGINAL Marshall™ REPLACEMENT PARTS, for
MARSHALL VS30R.
Complete replacement Potentiometer Kit for the
Marshall™ ValveState Model VS30R. 9 pots on the front panel.
Part #MPK-29 |
$51.95
|
|
Click on photo for
larger view |
Complete Marshall™ Potentiometer Kit,
8 SINGLE GANG POTS. ORIGINAL Marshall™
REPLACEMENT PARTS - MG15DFX
Complete replacement Potentiometer Kit for the
Marshall™ MG15DFX combo with 8 pots on the front panel. Instructions
included.
Part #MPK-35 |
$21.95 |
|
Click on photo for
larger view. Technical information on this kit courtesy of Jose
Almeida. |
Complete
Marshall™ Potentiometer Kit, 6 POTS TOTAL. ORIGINAL Marshall™ REPLACEMENT
PARTS. Marshall™ MODEL VS15 (without reverb).
Complete replacement Potentiometer Kit
for the Marshall™ ValveState Model VS15 (non-reverb model). 6 pots on the front panel.
Part #MPK-38 |
$31.95
|
|
Click on photo for
larger view. Technical information on this kit courtesy of Jose
Almeida. |
Complete
Marshall™ Potentiometer Kit, 6 POTS TOTAL. ORIGINAL Marshall™ REPLACEMENT
PARTS. Marshall™ MODEL VS15R (with reverb).
Complete replacement Potentiometer Kit
for the Marshall™ ValveState Model VS15R (reverb model). 7 pots on the front panel.
Part #MPK-39 |
$36.95
|
|
|
|
Fender™ Pot
Kits
Cross Reference Table is at the bottom of this page |
|
|
Click on photo for
larger view |
 Fender™ Potentiometer Set for the following
blackface amplifiers ONLY: Bandmaster Amp AA763, Bandmaster Amp AB763,
Bandmaster Amp AD1269, Concert Amp AA763, Concert Amp AB763, Deluxe Amp AB763, Pro Amp
AA763, Pro Amp AB763, Tremolux Amp AA763, Tremolux Amp AB763, Vibrolux Amp AA763, Vibrolux Amp AB763.
Contains 8 metal-shaft CTS pots, with the correct values and tapers to match the
original pots. Also contains 3 replacement carbon comp resistors which
are directly attached to certain pots in the kit. Contains two
1MA, four 250KA, one 3MRA, one 50KRA CTS pots, plus two 6800 and one 100K carbon comp
resistors. Two volume, two treble, two bass, one speed, one
intensity. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-101 |
$46.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Bandmaster Reverb AA768, Bandmaster Reverb AA1069,
Bandmaster Reverb AA270, Pro Reverb AB668, Pro Reverb AA1069, Pro Reverb AA270,
Super Reverb AA763, Super Reverb AB763, Super Reverb AB568, Super Reverb AA1069, Super Reverb AA270. Contains
10 metal-shaft CTS pots, with the correct values and tapers to match the
original pots. Also contains 2 replacement carbon comp resistors which
are directly attached to certain pots in the kit. Contains two
1MA, four 250KA, one 10KA, one 100KB, one 3MRA, one 50KRA CTS pots, plus one 6800 and one 100K carbon comp
resistors. Two volume, two treble, one middle, two bass, one
reverb, one speed, one
intensity. Note: This kit is NOT for recent reissue
versions of the these amps. We do have the correct kit for the
reissues. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-102 |
$58.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set
for the following amplifiers ONLY: Bassman AB165,
Bassman AC568, Bassman AA270, Bassman AA371.
Contains 6 metal-shaft CTS pots, with the correct values and tapers to match the
original pots. Contains two 1MA, and four 250KA. Also contains 2 replacement carbon comp
resistors which are directly attached to certain pots in the kit. Two volume, two treble, two bass.
See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-103 |
$34.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: Bassman AA165.
Contains 6 metal-shaft CTS pots, with the correct values and tapers to match the
original pots. Also contains 2 replacement carbon comp resistors
which are directly attached to certain pots in the kit. Contains two 1MA,
and four 250KA. Two volume, two treble, two bass.
See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-103A |
$34.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Deluxe Reverb AA763, Deluxe Reverb AB763, Deluxe
Reverb AB868, Deluxe Reverb A1270, Deluxe Reverb A1172, Pro Reverb AA165,
Vibrolux Reverb AA964, Vibrolux Reverb AB568, Vibrolux Reverb AA270, Vibroverb
AA763, Vibroverb AB763. Contains 9 metal-shaft CTS pots, with the
correct values and tapers to match the original pots. Also contains
3 replacement carbon comp resistors which
are directly attached to certain pots in the kit. Contains two
1MA, four 250KA, one 100KB, one 3MRA, one 50KRA CTS pots, plus two 6800 and one 100K carbon comp
resistors. Two volume, two treble, two bass, one
reverb, one speed, one
intensity. Note: This kit is NOT for
recent reissue versions of the these amps. We do have the correct
kit for the reissues. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-104 |
$52.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Deluxe Reverb or Vibrolux Reverb with Volume Boost - Silverface,
1977-1980.
Contains 8 metal-shaft CTS pots and one
CTS pot with metal shaft and push-pull switch, with the correct values and
tapers to match the original pots. Also contains 3 replacement carbon comp resistors which
are directly attached to certain pots in the kit. Contains two 1MA, four
250KA, one 100KB, one 3MRA, one 50KRA CTS pots, plus two 6800 and one 100K carbon comp
resistors. Two volume, two treble, two bass, one
reverb, one speed, one
intensity. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-104A |
$54.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Dual Showman Reverb AA768, Dual Showman Reverb
AA769, Dual Showman Reverb AA270, Twin Reverb AB763, Twin Reverb AC568, Twin
Reverb AA769, Twin Reverb AA270.
Contains 11 metal-shaft CTS pots, with the correct values and tapers to match
the original pots. Also contains one replacement carbon comp resistor which
is directly attached to one of the pots in the kit. Contains
two 1MA, four 250KA, two 10KA, one 100KB, one 3MRA, one 50KRA CTS pots, plus one 100K carbon comp
resistor. Two volume, two treble, two middle, two bass, one
reverb, one speed, one
intensity. Note: This kit is NOT for recent reissue versions
of the these amps. We do have the correct kit for the reissues. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-105 |
$62.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: Princeton Amp AA964.
Contains 5 metal-shaft CTS pots, with the correct values and tapers to match the
original pots. Also contains 2 replacement carbon comp resistors which
are directly attached to certain pots in the kit. Contains one
1MA, two 250KA, one 3MRA, one 250KL CTS pots, plus one 6800 and one 100K carbon comp
resistors. One volume, one treble, one bass, one speed, one
intensity. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-106 |
$28.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set
for the following amplifiers ONLY: Princeton Reverb AA1164,
Princeton Reverb B1270. Contains 6 metal-shaft CTS pots, with the correct
values and tapers to match the original pots. Also contains 2 replacement
carbon comp resistors which are directly attached to certain pots in the kit.
Contains one 1MA, two 250KA, one 100KB, one
3MRA, one 250KL CTS pots, plus one 6800 and one 100K carbon comp
resistors. One volume, one treble, one bass, one reverb, one speed, one
intensity. Note: This kit is NOT for recent reissue
versions of the these amps. We do have the correct kit for the
reissues. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-107 |
$34.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Showman Amp AA763, Showman Amp AB763.
Contains 9 metal-shaft CTS pots, with the correct values and tapers to match the
original pots. Also contains two replacement carbon comp resistor which
is directly attached to one of the pots in the kit. Contains
two 1MA, four 250KA, one 10KA, one 3MRA, one 50KRA CTS pots, plus one 6800 and one 100K carbon comp
resistors. Two volume, two treble, one middle, two bass, one speed, one
intensity. The speed pot has a
brass-colored shaft; the other pots have silver-colored shafts. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-108 |
$52.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Bandmaster Reverb AA768, Bandmaster Reverb AA1069,
Bandmaster Reverb AA270, Pro Reverb AB668, Pro Reverb AA1069, Pro Reverb AA270,
Super Reverb AA763, Super Reverb AB763, Super Reverb AB568, Super Reverb AA1069, Super Reverb AA270. Contains
10 metal-shaft CTS pots, with the correct values and tapers to match the
original pots. Also contains 2 replacement carbon comp resistors which
are directly attached to certain pots in the kit. Contains two
1MA, four 250KA, one 10KA, one 100KB, one 3MRA, one 50KRA CTS pots, plus one 6800 and one 100K carbon comp
resistors. Two volume, two treble, one middle, two bass, one
reverb, one speed, one
intensity. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-102 |
$58.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set
for the following amplifiers ONLY: Bassman AB165,
Bassman AC568, Bassman AA270, Bassman AA371.
Contains 6 metal-shaft CTS pots, with the correct values and tapers to match the
original pots. Contains two 1MA, and four 250KA. Also contains 2 replacement carbon comp
resistors which are directly attached to certain pots in the kit. Two volume, two treble, two bass.
See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-103 |
$34.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: Bassman AA165.
Contains 6 metal-shaft CTS pots, with the correct values and tapers to match the
original pots. Also contains 2 replacement carbon comp resistors
which are directly attached to certain pots in the kit. Contains two 1MA,
and four 250KA. Two volume, two treble, two bass.
See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-103A |
$34.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Deluxe Reverb AA763, Deluxe Reverb AB763, Deluxe
Reverb AB868, Deluxe Reverb A1270, Deluxe Reverb A1172, Pro Reverb AA165,
Vibrolux Reverb AA964, Vibrolux Reverb AB568, Vibrolux Reverb AA270, Vibroverb
AA763, Vibroverb AB763. Contains 9 metal-shaft CTS pots, with the
correct values and tapers to match the original pots. Also contains
3 replacement carbon comp resistors which
are directly attached to certain pots in the kit. Contains two
1MA, four 250KA, one 100KB, one 3MRA, one 50KRA CTS pots, plus two 6800 and one 100K carbon comp
resistors. Two volume, two treble, two bass, one
reverb, one speed, one
intensity. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-104 |
$52.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Deluxe Reverb or Vibrolux Reverb with Volume Boost - Silverface,
1977-1980.
Contains 8 metal-shaft CTS pots and one
CTS pot with metal shaft and push-pull switch, with the correct values and
tapers to match the original pots. Also contains 3 replacement carbon comp resistors which
are directly attached to certain pots in the kit. Contains two 1MA, four
250KA, one 100KB, one 3MRA, one 50KRA CTS pots, plus two 6800 and one 100K carbon comp
resistors. Two volume, two treble, two bass, one
reverb, one speed, one
intensity. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-104A |
$54.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Dual Showman Reverb AA768, Dual Showman Reverb
AA769, Dual Showman Reverb AA270, Twin Reverb AB763, Twin Reverb AC568, Twin
Reverb AA769, Twin Reverb AA270.
Contains 11 metal-shaft CTS pots, with the correct values and tapers to match
the original pots. Also contains one replacement carbon comp resistor which
is directly attached to one of the pots in the kit. Contains
two 1MA, four 250KA, two 10KA, one 100KB, one 3MRA, one 50KRA CTS pots, plus one 100K carbon comp
resistor. Two volume, two treble, two middle, two bass, one
reverb, one speed, one
intensity. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-105 |
$62.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: Princeton Amp AA964.
Contains 5 metal-shaft CTS pots, with the correct values and tapers to match the
original pots. Also contains 2 replacement carbon comp resistors which
are directly attached to certain pots in the kit. Contains one
1MA, two 250KA, one 3MRA, one 250KL CTS pots, plus one 6800 and one 100K carbon comp
resistors. One volume, one treble, one bass, one speed, one
intensity. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-106 |
$28.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set
for the following amplifiers ONLY: Princeton Reverb AA764, Princeton
Reverb AA1164,
Princeton Reverb B1270. Contains 6 metal-shaft CTS pots, with the correct
values and tapers to match the original pots. Also contains 2 replacement
carbon comp resistors which are directly attached to certain pots in the kit.
Contains one 1MA, two 250KA, one 100KB, one
3MRA, one 250KL CTS pots, plus one 6800 and one 100K carbon comp
resistors. One volume, one treble, one bass, one reverb, one speed, one
intensity. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-107 |
$34.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Showman Amp AA763, Showman Amp AB763.
Contains 9 metal-shaft CTS pots, with the correct values and tapers to match the
original pots. Also contains two replacement carbon comp resistor which
is directly attached to one of the pots in the kit. Contains
two 1MA, four 250KA, one 10KA, one 3MRA, one 50KRA CTS pots, plus one 6800 and one 100K carbon comp
resistors. Two volume, two treble, one middle, two bass, one speed, one
intensity. The speed pot has a
brass-colored shaft; the other pots have silver-colored shafts. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-108 |
$52.95 |
|
Click on photo for
larger view |
FENDER
PARTIAL POTENTIOMETER KIT - 65 TWIN REVERB REISSUE.
Contains 10 control pots as found in the 65
Twin Reverb Reissue, from 1991 to the present. Also fits the 68
Custom Twin Reverb from 2012 to the present. Does not include the bias
pot, or the Speed Control pot on the front panel.
INCLUDES NUTS & WASHERS
Part #FPK-109 |
$64.95 |
|
Click on photo for
larger view |
FENDER
PARTIAL POTENTIOMETER KIT - 65 DELUXE REVERB REISSUE.
Contains 8 control pots as found in the 65
Deluxe Reverb Reissue, from 1993 to the present. Also fits the 68
Custom Deluxe Reverb and the 68 Custom Vibrolux Reverb from 2012 to the present.
Does not include the bias pot, or the Speed Control pot on the front panel.
INCLUDES NUTS & WASHERS
Part #FPK-110 |
$56.95 |
|
Click on photo for
larger view |
FENDER
PARTIAL POTENTIOMETER KIT - 65 SUPER REVERB REISSUE.
Contains 9 control pots as found in the 65
Super Reverb Reissue, from 2001 to the present. Does not include the
bias pot, or the Speed Control pot on the front panel.
INCLUDES NUTS & WASHERS
Part #FPK-111 |
$65.95 |
|
Click on photo for
larger view |
FENDER
PARTIAL POTENTIOMETER KIT - 65 PRINCETON REVERB REISSUE.
Contains 5 control pots as found in the 65
Princeton Reverb Reissue, from 2008 to the present. Also fits the 68
Custom Princeton Reverb, from 2013 to the present. Does not include
the bias pot, or the Speed Control pot on the front panel.
INCLUDES NUTS & WASHERS
Part #FPK-112 |
$44.95 |
|
Click on photo for
larger view |
FENDER
COMPLETE POTENTIOMETER KIT - 68 CUSTOM PRO REVERB REISSUE.
Contains 6 control pots as found in the 68
Custom Pro Reverb Reissue, from 2020 to the present. Does not
include the bias pot, or the Speed Control pot on the front panel.
INCLUDES NUTS & WASHERS
Part #FPK-112A |
$47.95 |
|
Click on photo for
larger view |
FENDER
COMPLETE POTENTIOMETER KIT - HOT ROD DELUXE AND HOT ROD DEVILLE (ORIGINAL
VERSIONS - NOT VERSION III).
Contains all 8 control pots as found in the Hot
Rod Deluxe and Hot Rod Deville models, from 1996 to 2010. Does not include the
Hot Rod Deluxe III or Hot Rod Deville III (with black control panel).
INCLUDES NUTS & WASHERS
Part #FPK-113 |
$31.95 |
|
Click on photo for
larger view |
FENDER
COMPLETE POTENTIOMETER KIT - BLUES DELUXE AND BLUES DEVILLE (ORIGINAL
VERSIONS - NOT REISSUE VERSIONS).
Contains all 8 control pots as found in the
original Blues Deluxe and Blues Deville models, from 1993 to 2004. For
the Blues Deluxe Reissue and Blues Deville Reissue models from 2005 to the
present, see the FPK-115 kit below.
INCLUDES NUTS & WASHERS
Part #FPK-114 |
$31.95 |
|
Click on photo for
larger view |
FENDER
COMPLETE POTENTIOMETER KIT - BLUES DELUXE REISSUE AND BLUES DEVILLE REISSUE.
Contains all 8 control pots as found in the
Blues Deluxe Reissue and Blues Deville Reissue models, from 2005 to the present.
INCLUDES NUTS & WASHERS
Part #FPK-115 |
$31.95 |
|
Click on photo for
larger view |
FENDER
COMPLETE POTENTIOMETER KIT - BLUES JUNIOR.
Contains all 6 control pots as found in the
original Blues
Junior and Blues Junior III and IV from 1993 to the present.
Part #FPK-116 |
$49.95 |
|
Click on photo for
larger view |
FENDER
COMPLETE POTENTIOMETER KIT - BLUES JUNIOR.
Contains all 6 control pots as found in the
original Blues
Junior and Blues Junior III and IV from 1993 to the present.
Part #FPK-116 |
$17.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Bassman 135 (Silverface, 1977-1983).
Contains 9 metal shaft CTS pots, with the correct values and tapers to match the
original pots. Contains three 1MA (J taper),
two 250KA, two 250KA (J taper), two 10KA CTS pots. Two volume, two treble, two middle, two bass, one
master volume. The volume pots and treble pots have brass-colored shafts;
the other pots have silver-colored shafts. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-117 |
$52.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Bassman 100 (Silverface Head, 1972-1976) and
Bassman Ten (Silverface Combo, 1972-1982). Note:
This is NOT for the small Bassman 100 combo from recent years, and is NOT for
the Bassman 100T blackface head currently on the market.
Contains 8 metal-shaft CTS pots, with the correct values and tapers to match the
original pots. Contains three 1MA, four 250KA, and one 10KA CTS pot. Two volume, two treble, one middle, two bass, one
master volume. The volume pots and treble pots have brass-colored
shafts; the other pots have silver-colored shafts. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-118 |
$46.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Super Bassman (Silverface Head, 1969-1971), Bantam
Bass Amp (Silverface Combo, 1969-1971) Note:
This is NOT for the new blackface Super Bassman head from recent years.
Contains 7 metal-shaft CTS pots, with the correct values and tapers to match the
original pots. Also contains one replacement carbon comp resistor which
is directly attached to one of the pots in the kit. Contains
two 1MA, two 250KA, two 250KA (2-35 taper, and one 10KA pot, and an 8.2K resistor. Two volume, two treble, one middle, two bass.
The volume pots and treble pots have brass-colored shafts; the other pots have
silver-colored shafts. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-118A |
$39.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Bassman 50 Silverface Head (1971-1976).
Contains 6 metal-shaft CTS pots, with the correct values and tapers to match the
original pots. Also contains two replacement carbon comp resistors which
are directly attached to certain pots in the kit. Contains two
1MA, four 250KA pots, plus one 6800 ohm and one 8200 ohm carbon comp resistors.
Two volume, two treble, two bass. The volume pots and treble pots
have brass-colored shafts; the other pots have silver-colored shafts. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-118B |
$34.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Bassman 70 Silverface Head (1977-1983).
Contains 7 metal-shaft CTS pots, with the correct values and tapers to match the
original pots. Also contains two replacement carbon comp resistors which
are directly attached to certain pots in the kit. Contains
three 1MJ, two 250KA, two 250KJ, plus one 6800 ohm and one 8200 ohm carbon comp resistors.
Two volume, two treble, two bass, one master volume. The volume pots
and treble pots have brass-colored shafts; the other pots have silver-colored
shafts. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-118C |
$39.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Bassman 20 Blackface Combo (1982-1983).
Contains 4 metal shaft CTS pots, with the correct values and tapers to match the
original pots. Contains
one 1MJ, two 250KJ, and one 10KA CTS pots. One volume, one treble, one bass, one
middle. The volume pots, bass and treble pots have brass-colored shafts;
the mid pot has a silver-colored shaft. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-118D |
$22.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Champ 5C1 (1953), Champ 5D1 (1954), Champ 5E1
(1955-1956), Champ 5F1 (1956-1964).
Contains a replacement volume control with rotary
AC power switch as found in the tweed Champ 5C1, 5D1, 5E1 and 5F1 from 1953 to
1964. See
Cross Reference Table
Part #FPK-119 |
$4.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Champ AA764 (Blackface, 1964-1967), Champ CBS
design (Silverface, 1968-1982).
Contains 3 metal-shaft CTS pots, with the correct
values and tapers to match the original pots. Also contains a 15K carbon comp resistor which is attached
to the bass pot. Contains one 1MA, and two 250KA pots. One volume,
one bass, one treble. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-120 |
$16.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Deluxe 5A3, 5B3.
Contains three 1MA controls, one equipped with a rotary AC
power switch. As found in the tweed Deluxe 5A3 and 5B3 from
1948-1953. See
Cross Reference Table
Part #FPK-121 |
$10.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Deluxe 5C3, 5D3, and 5E3.
Contains three 1MA controls. As found in the tweed Deluxe 5C3,
5D3 and 5E3 from
1953-1960. See
Cross Reference Table
Part #FPK-122 |
$8.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Harvard 5F10 and 6G10.
Contains one 1MA and one 1ML controls. As found in the tweed
Harvard 5F10 and 6G10 from
1955-1962. See
Cross Reference Table
Part #FPK-123 |
$5.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Princeton 5A2, 5B2, 5C2, and 5D2.
Contains two 1MA controls, one equipped with a
rotary AC power switch. As found in the tweed
Princeton 5A2, 5B2, 5C2, and 5D2 from
1948-1955. See
Cross Reference Table
Part #FPK-124 |
$7.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Princeton 6G2.
Contains two 1MA controls, one 3MRA, and one
250KL. Also includes a 100K resistor. Metal shaft CTS pots,
with the correct values and tapers to match the original pots. As found in the brownface
Princeton Amp 6G2 from
1963. The
speed pot has a brass-colored shaft; the other
pots have silver-colored shafts. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-125 |
$22.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Super 5A4, 5B4, 5C4, and 5D4.
Contains three 1MA controls. As found in the tweed
Super 5A4, 5B4, 5C4, and 5D4 from
1947-1955. See
Cross Reference Table
Part #FPK-126 |
$8.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Super 5E4, 5E4A, 5F4
Contains four 1MA and one 5KL controls. As found in the tweed
Super 5E4, 5E4A, and 5F4 from
1955-1960. See
Cross Reference Table
Part #FPK-127 |
$14.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Vibrolux 5E11, 5F11.
Contains one 1MA, one 1ML, one 250KL and one 2ML controls. As found in the tweed
Vibrolux 5E11 and 5F11 from
1956-1961. See
Cross Reference Table
Part #FPK-128 |
$11.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Pro Amp 5C5, 5D5, 5E5.
Contains three 1MA controls. As found in the tweed
Pro 5C5, 5D5, and 5E5 from
1952-1960. See
Cross Reference Table
Part #FPK-129 |
$8.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: 57 Twin Reissue and 57 Pro-Amp Reissue (2009-Present, Fender Custom Shop)
Contains five metal-shaft CTS potentiometers. As found in the tweed
57 Twin Amp and 57 Pro-Amp starting in 2009. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-130 |
$28.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: 57 Deluxe Reissue (2009-present, Fender Custom Shop)
Contains three metal-shaft CTS potentiometers. As found in the tweed
57 Custom Deluxe starting in 2009. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-131 |
$16.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: 57 Champ Reissue (2009-present, Fender Custom Shop)
Contains one metal-shaft CTS potentiometer. As found in the tweed
57 Champ starting in 2009. See
Cross Reference Table
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-132 |
$5.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Ultra Chorus and Ultimate Chorus, 1990s era. NOT FOR
the ULTIMATE CHORUS DSP, introduced in 2000.
Contains fourteen D-Shaft snap-in potentiometers. See
Cross Reference Table
Part #FPK-133 |
$49.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: Deluxe 112 (PR205), early 1990s era. NOT FOR
the DELUXE 112 PLUS (PR291), introduced in 1995.
Contains ten D-Shaft snap-in potentiometers. See
Cross Reference Table
Part #FPK-134 |
$38.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: Deluxe 112 Plus (PR291), mid 1990s era. NOT
FOR the ORIGINAL DELUXE 112 (PR205), introduced in 1993.
Contains ten D-Shaft snap-in potentiometers. See
Cross Reference Table
Part #FPK-135 |
$38.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: Performer 650 (PR242), mid 1990s era. NOT
FOR the PERFORMER 1000 (PR209).
Contains ten D-Shaft snap-in potentiometers. See
Cross Reference Table
Part #FPK-137 |
$38.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: Performer 1000 (PR209), mid 1990s era. NOT
FOR the PERFORMER 650 (PR242).
Contains twelve D-Shaft snap-in potentiometers. See
Cross Reference Table
Part #FPK-138 |
$46.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: Roc Pro 700 (PR242), mid 1990s era. NOT
FOR the ROC PRO 1000 (PR209).
Contains ten D-Shaft snap-in potentiometers. See
Cross Reference Table
Part #FPK-139 |
$38.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: Roc Pro 1000 (PR209), mid 1990s era. NOT
FOR the ROC PRO 700 (PR242).
Contains twelve D-Shaft snap-in potentiometers. See
Cross Reference Table
Part #FPK-140 |
$46.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: Stage 112SE (PR203), 1992-1995. Contains ten D-Shaft snap-in potentiometers. See
Cross Reference Table
Part #FPK-141 |
$38.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: Frontman 15R with metal type split/knurled shafts.
*Note: This kit is designed for versions that have metal shaft pots with a
split cut down the shaft approximately 5/16" long, and the outside of the shaft
is "knurled" or "splined" with ridges. This kit will NOT
work on versions which have pots with a black plastic shaft that is smooth with
a flat surface on one side (half-moon shaft or "D"-shaped shaft). No kit
exists to replace that type of pot. Contains seven potentiometers. See
Cross Reference Table
Part #FPK-142 |
$19.95 |
 |
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: Frontman 25R with metal type split/knurled shafts.
*Note: This kit is designed for versions that have metal shaft pots with a
split cut down the shaft approximately 5/16" long, and the outside of the shaft
is "knurled" or "splined" with ridges. This kit will NOT
work on versions which have pots with a black plastic shaft that is smooth with
a flat surface on one side (half-moon shaft or "D"-shaped shaft). No kit
exists to replace that type of pot. Contains seven potentiometers. See
Cross Reference Table
Part #FPK-143 |
$19.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: M-80 Chorus (PR154, 1990-1993). (Does not fit other
M-80 models - only the M-80 Chorus). Contains 11 potentiometers. See
Cross Reference Table
Part #FPK-144 |
$42.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: M-80 Pro or M-80 HM series. (1990-1993). (Does not fit other
M-80 models - only the M-80 Pro or M-80 HM Series). Contains 9 potentiometers. See
Cross Reference Table
Part #FPK-144A |
$34.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: H.O.T (PR141, 1990-1991) Contains 3 potentiometers. See
Cross Reference Table
Part #FPK-145 |
$20.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifier ONLY: R.A.D. Guitar Amp (PR137, 1989-1991) Contains
2 potentiometers. See
Cross Reference Table
Part #FPK-146 |
$13.95 |
|
Click on photo for
larger view |
Complete
Fender™ Potentiometer Kit,
11 Pots total. Fender™ Sidekick Switcher or Sidekick Reverb 65, from The late 1980s. Complete replacement Potentiometer Kit for the
Fender™ Sidekick Switcher and the Sidekick Reverb 65, as shown below. 11 pots on the front panel.
Part #FPK-147A |
$30.95 |
|
Click on photo for
larger view |
Complete
Fender™ Potentiometer Kit,
5 Pots total. Fender™ Sidekick Bass, Sidekick Bassman, or Bassman 60 from The late 1980s. Complete replacement Potentiometer Kit for the
Fender™ Sidekick Bass, Sidekick Bassman, and the Bassman 60 1x15 combo, as shown below. 5 pots on the front panel.
(Not for the Sidekick 35 Bass or Sidekick 65 Bass models. Also not
for the newer Bassman 60 kickback combo models introduced in the 2000s).
Part #FPK-147B |
$14.95 |
|
Click on photo for
larger view |
Complete
Fender™ Potentiometer Kit,
7 Pots total. Fender™ Sidekick 15 Reverb Model, from the mid 1980s. Complete replacement Potentiometer Kit for the
Fender™ Sidekick 15 Reverb. 7 pots on the front panel.
Part #FPK-147C |
$19.95 |
|
Click on photo for
larger view |
Complete
Fender™ Potentiometer Kit,
8 Pots total. Fender™ Sidekick 15 Chorus Model, from the mid 1980s. Complete replacement Potentiometer Kit for the
Fender™ Sidekick 15 Chorus. 8 pots on the front panel.
Part #FPK-147D |
$22.95 |
|
Click on photo for
larger view |
Complete
Fender™ Potentiometer Kit,
9 Pots total. Fender™ Sidekick Chorus 20 Model, from the mid 1980s. Complete replacement Potentiometer Kit for the
Fender™ Sidekick Chorus 20. 9 pots on the front panel.
Part #FPK-147E |
$25.95 |
|
Click on photo for
larger view |
Complete
Fender™ Potentiometer Kit,
8 Pots total. Fender™ [Squier] Sidekick 25R and Sidekick 35R (Sidekick Reverb 25
and 35), from the mid 1980s. Complete replacement Potentiometer Kit for the
Fender™ Squier™ Sidekick 25R or 35R. 8 pots on the front panel.
Part #FPK-147F |
$22.95 |
|
Click on photo for
larger view |
Complete
Fender™ Potentiometer Kit,
1 Pot total. Fender™ Champion 600 from 2006-2011.
The Champion 600 Reissue model contains just one
potentiometer, for volume. This is the replacement pot.
Part #FPK-148 |
$6.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set
- Fender 75 Amp Series (Combo or Head)
Contains 8 metal-shaft CTS pots, with the correct values and tapers to match
the original pots. 3 of the pots (Bass, Middle and Treble) have pull
switches for the individual "boost" functions associated with those controls. Contains
two A1M, two A250K with pull boost, one A10K with pull boost, and three B100K CTS pots.
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-149 |
$59.95 |
|
Click on photo for
larger view |
Partial
Fender™ Potentiometer Set for the following
amplifier ONLY: Deluxe 85 (PR46) introduced in 1988. (Does not
fit the Studio 85 or Eighty-Five amp PR38 from the same era). Contains ten potentiometers.
The Limiter potentiometer is no longer available and is not part of the kit.
Instructions included.
Part #FPK-150 |
$38.95 |
|
Click on photo for
larger view |
Partial
Fender™ Potentiometer Set for the following
amplifier ONLY: Princeton Chorus (PR82) introduced in 1988, also
known as the Princeton Stereo Chorus. (Does
not fit the Princeton Chorus DSP PR424 from 1999). Contains ten potentiometers.
The Limiter potentiometer is no longer available and is not part of the kit.
Instructions included.
Part #FPK-151 |
$38.95 |
|
Click on photo for
larger view |
Partial
Fender™ Potentiometer Set for the following
amplifier ONLY: Bassman 250 PR597. Contains all pots
except for the Low Mid Freq and the High Mid Freq - those pots are no longer
available. A total of 11 pots is included in the kit, along with
instructions.
Part #FPK-152 |
$42.95 |
|
Click on photo for
larger view |
Partial
Fender™ Potentiometer Set for the following
amplifier ONLY: Champ 25SE (PR201), mid 1990s era.
Does not include the Loudness control pot which is no longer available.
Contains ten D-Shaft snap-in potentiometers.
Part #FPK-153 |
$38.95 |
|
Click on photo for
larger view |
Fender™ Potentiometer Set for the following
amplifiers ONLY: Fender Musicmaster Bass Amp (Silverface, 1970-1982).
Contains two metal-shaft CTS potentiometers.
Volume: 250K-L, Tone: 1M-A.
Note: This kit includes the closest
currently-available pots from CTS to substitute for the original pots in the
vintage amps. Exact matches for the original pots are no longer
being manufactured. We assure that these pots are the closest high-quality
pots which are currently available.
Part #FPK-154 |
$10.95 |
|
Click on photo for
larger view |
Partial Fender™ Potentiometer Set for the following
amplifier ONLY: Studio 85, introduced in 1988. Contains all
pots except for the limiter pot, which has been discontinued.
Contains
eight D-Shaft snap-in potentiometers.
Part #FPK-201 |
$31.95 |
|
Click on photo for
larger view |
Partial
Fender™ Potentiometer Set for the following
amplifier ONLY: Deluxe 90 DSP, introduced in 2002.
Does not include the Clean Channel Middle control pot which is no longer available.
Also not included is the FX Select control,
which is a special digital encoder and is not a potentiometer. Contains ten D-Shaft snap-in potentiometers.
Part #FPK-202 |
$38.95 |
|
Click on photo for
larger view |
Fender™
Partial Potentiometer Set for the following
amplifiers ONLY: Pro 185, Stage 185, London 185.
Contains twelve D-Shaft snap-in potentiometers.
Contains all pots used in these amps except for the Contour control and the Gain
Offset control (on the rear panel). Those two pots are no longer
available.
Part #FPK-203 |
$46.95 |
|
Click on photo for
larger view |
Fender™
Partial Potentiometer Set for the following
amplifier ONLY: Power Chorus.
Contains fourteen D-Shaft snap-in potentiometers.
Note: The pots for the Contour control and the Gain Offset are no longer
available from Fender, so they are not included in this kit. Also,
the presence control in the kit does not have a detent at the 50% position, as
that pot with the detent is also discontinued.
Part #FPK-204 |
$54.95 |
|
Click on photo for
larger view |
Fender™
Partial Potentiometer Set for the following
amplifier ONLY: Deluxe 900.
Contains ten D-Shaft snap-in potentiometers.
Contains all pots used in these amps except for the Middle Control on
Channel 1. That pot is no longer
available.
Part #FPK-205 |
$38.95 |
|
 |
PARTIAL FENDER
POTENTIOMETER KIT - TWIN AMP (PRO TUBE SERIES).
Contains all front panel pots except for the
vibrato intensity control (that pot is no longer available). 12 Pots total in
the kit for the Twin Amp (produced from 2001-2009) The Twin Amp for which
this kit is designed has both vibrato and reverb, and also has two white push
switches on the front panel (bright and channel select).
Another
similar Twin Amp made from 1995-2001 does not have vibrato, has no front panel
push switches, and this pot kit is not for that particular model.
Part #FPK-209 |
$53.95 |
|
|
|
Fender Cross Reference Table: |
|
|
|
|
Amplifier Model and Date Code |
Pot Set |
|
|
|
|
75 Combo (1980-1982) |
FPK-149 |
|
75 Head (1980-1982) |
FPK-149 |
|
Bandmaster Amp AA763 (Blackface) |
FPK-101 |
|
Bandmaster Amp AB763 (Silverface) |
FPK-101 |
|
Bandmaster Amp AD1269 (Silverface) |
FPK-101 |
|
Bandmaster Rev AA768 (Silverface) |
FPK-102 |
|
Bandmaster Reverb AA1069 (Silverface) |
FPK-102 |
|
Bandmaster Reverb AA270 (Silverface) |
FPK-102 |
|
Bantam Bass CFA7003 (Silverface Combo, 1969-1971) |
FPK-118A |
|
Bassman AA165 (Blackface Head) |
FPK-103A |
|
Bassman AB165 (Blackface Head) |
FPK-103 |
|
Bassman AC568 (Silverface Head) |
FPK-103 |
|
Bassman AA270 (Silverface Head) |
FPK-103 |
|
Bassman AA371 (Silverface Head) |
FPK-103 |
|
Bassman 10 or Bassman Ten (Silverface Combo, 1972-1982) |
FPK-118 |
|
Bassman 20 (Blackface Combo, 1982-1983) |
FPK-118D |
|
Bassman 50 (Silverface Head, 1971-1976) |
FPK-118B |
|
Bassman 60 (Blackface Combo, late 1980s 1x15 combo) |
FPK-147B |
|
Bassman 70 (Silverface Head, 1977-1983) |
FPK-118C |
|
Bassman 100 (Silverface Head, 1972-1976) |
FPK-118 |
|
Bassman 135 (Silverface Head, 1977-1983) |
FPK-117 |
|
Bassman 250 PR597 Partial Kit |
FPK-152 |
|
Super Bassman (Silverface Head, 1969-1971) |
FPK-118A |
|
Blues Deluxe/Deville (Original - 1993-2004) |
FPK-114 |
|
Blues Deluxe/Deville (Reissue - 2005-Present) |
FPK-115 |
|
Blues Junior (1993-Present) |
FPK-116 |
|
Champ 5C1, 5D1, 5E1, 5F1 (1953-1964) |
FPK-119 |
|
57 Champ Amp Reissue (Tweed, 2009-present) |
FPK-132 |
|
Champ Blackface/Silverface AA764 (1964-1982) |
FPK-120 |
|
|
|
|
Champ 25SE PR201 Partial Kit |
FPK-153 |
|
Concert Amp AA763 (Blackface, 1963) |
FPK-101 |
|
Concert Amp AB763 (Blackface, 1963-1965) |
FPK-101 |
|
Champion 600 Reissue (2006-2011) |
FPK-148 |
|
Deluxe Tweed 5A3, 5B3 (1948-1953) |
FPK-121 |
|
Deluxe Tweed 5C3, 5D3, 5E3 (1953-1960) |
FPK-122 |
|
57 Deluxe Reissue (Tweed, 2009-present) |
FPK-131 |
|
Deluxe 112 PR205 (Introduced in 1993) |
FPK-134 |
|
Deluxe 112 Plus PR291 (Introduced in 1995) |
FPK-135 |
|
Deluxe 85 PR46 (Introduced in 1988) |
FPK-150 |
|
Deluxe AB763 (Blackface) |
FPK-101 |
|
Deluxe Reverb AA763 (Blackface) |
FPK-104 |
|
Deluxe Reverb AB763 (Blackface) |
FPK-104 |
|
Deluxe Reverb AB868 |
FPK-104 |
|
Deluxe Reverb A1270 (Silverface) |
FPK-104 |
|
Deluxe Reverb A1172 (Silverface) |
FPK-104 |
|
Deluxe Reverb with Volume Boost (1977-1980) |
FPK-104A |
65
Deluxe Reverb Reissue (1993-present)
(NOT for the Deluxe Reverb II) |
FPK-110 |
|
68 Custom Deluxe Reverb (Silverface, Drip Edge, 2012-present) |
FPK-110 |
|
Dual Showman Reverb AA768 (Silverface, 1968) |
FPK-105 |
|
Dual Showman Reverb AA270 (Silverface, 1970-?) |
FPK-105 |
|
Dual Showman Reverb AA769 (Silverface, 1969) |
FPK-105 |
|
Fender 75 Combo (1980-1982) |
FPK-149 |
|
Fender 75 Head (1980-1982) |
FPK-149 |
|
Frontman 15R (With Knurled, Split-Shaft pots only - see notes*) |
FPK-142 |
|
Frontman 25R (With Knurled, Split-Shaft pots only - see notes*) |
FPK-143 |
|
Harvard 5F10, 6G10 (Tweed) |
FPK-123 |
|
H.O.T. Guitar Amp (PR141, 1990-1991) |
FPK-145 |
|
Hot Rod Deluxe/Deville (Original - Not version III) |
FPK-113 |
|
London 185 Partial Kit (1988-1991) |
FPK-203 |
|
M-80 Chorus (PR154, 1990-1993) |
FPK-144 |
|
M-80 Pro and HM Series (PR97, 1990-1993) |
FPK-144A |
|
Musicmaster Bass Amp (Silverface, 1970-1982) |
FPK-154 |
|
Performer 650 (PR242, mid 1990s) |
FPK-137 |
|
M-80 Chorus (PR154, 1990-1993) |
FPK-144 |
|
London 185 Partial Kit (1988-1991) |
FPK-203 |
|
M-80 Pro and HM Series (PR97, 1990-1993) |
FPK-144A |
|
Performer 650 (PR242, mid 1990s) |
FPK-137 |
|
Performer 1000 (PR209, mid 1990s) |
FPK-138 |
|
Power Chorus (PR117, 1989-1991) |
FPK-204 |
|
Princeton 5A2, 5B2, 5C2, 5D2 (Tweed, 1948-1955) |
FPK-124 |
|
Princeton 6G2 (Brownface, 1963) |
FPK-125 |
|
Princeton AA964 (Blackface) |
FPK-106 |
|
Princeton Chorus PR82 Partial Kit |
FPK-151 |
|
Princeton Reverb AA764, AA1164 (Blackface) |
FPK-107 |
|
Princeton Reverb B1270 (Silverface) |
FPK-107 |
|
65
Princeton Reverb Reverb Reissue (2008-present) (NOT for the
Princeton Reverb II) |
FPK-112 |
|
68 Custom
Princeton Reverb (Silverface, Drip Edge, 2013) |
FPK-112 |
|
Pro 185 Partial Kit (1988-1991) |
FPK-203 |
|
Pro Amp 5C5, 5D5, 5E5 (Tweed, 1952-1960) |
FPK-129 |
|
57
Pro Amp Reissue (Tweed, 2009-present) |
FPK-130 |
|
Pro Amp AA763 (Blackface) |
FPK-101 |
|
Pro Amp AB763 (Blackface) |
FPK-101 |
|
Pro Junior and Pro Junior III (1993-present) |
FPK-116A |
|
Pro Reverb AA165 (Blackface) |
FPK-104 |
|
Pro Reverb AB668 |
FPK-102 |
|
Pro Reverb AA1069 (Silverface) |
FPK-102 |
|
Pro Reverb AA270 (Silverface) |
FPK-102 |
|
R.A.D. Guitar Amp PR137 (1989-1991) |
FPK-146 |
|
Roc Pro 700 (PR242, mid 1990s) |
FPK-139 |
|
Roc Pro 1000 (PR209, mid 1990s) |
FPK-140 |
|
75 Combo (1980-1982) |
FPK-149 |
|
75 Head (1980-1982) |
FPK-149 |
|
Showman Amp AA763 (Blackface) |
FPK-108 |
|
Showman Amp AB763 (Blackface) |
FPK-108 |
|
Sidekick Bass (Mid 1980s - 5 Pots Total) |
FPK-147B |
|
Sidekick Bassman (Mid 1980s - 5 Pots Total) |
FPK-147B |
|
Sidekick Chorus 20 (Mid 1980s - 9 Pots Total) |
FPK-147E |
|
Sidekick 15 Chorus (Mid 1980s - 8 Pots Total) |
FPK-147D |
|
Sidekick 15 Reverb (Mid 1980s - 7 Pots Total) |
FPK-147C |
|
Sidekick Reverb 65 (Mid 1980s - 11 Pots Total) |
FPK-147A |
|
Sidekick Switcher (Mid 1980s - 11 Pots Total) |
FPK-147A |
|
Stage 112SE (PR203, 1992-1995) |
FPK-141 |
|
Stage 185 Partial Kit (1988-1991) |
FPK-203 |
|
Studio 85 Partial Kit (1988-1990) |
FPK-201 |
|
Super 5A4, 5B4, 5C4, 5D4 (Tweed, 1947-1955) |
FPK-126 |
|
Super 5E4, 5E4A, 5F4 (Tweed, 1955-1960) |
FPK-127 |
|
Super Bassman (Silverface Bass Head, 1969-1971) |
FPK-118A |
|
Super Reverb AA763 (Blackface) |
FPK-102 |
|
Super Reverb AB763 (Blackface) |
FPK-102 |
|
Super Reverb AB568 |
FPK-102 |
|
Super Reverb AA1069 (Silverface) |
FPK-102 |
|
Super Reverb AA270 (Silverface) |
FPK-102 |
|
65 Super Reverb Reissue (2001-present) |
FPK-111 |
|
Tremolux Amp AA763 (Blackface) |
FPK-101 |
|
Tremolux Amp AB763 (Blackface) |
FPK-101 |
|
57 Twin Amp Reissue (Tweed, 2009-present) |
FPK-130 |
|
Twin Amp Partial Kit (Pro Tube Series, PR449, 2001-2009) |
FPK-209 |
|
Twin Reverb AB763 (Blackface) |
FPK-105 |
|
Twin Reverb AC568 |
FPK-105 |
|
Twin Reverb AA769 (Silverface) |
FPK-105 |
|
Twin Reverb AA270 (Silverface) |
FPK-105 |
65 Twin Reverb Reissue (1991-present)
NOT for Twin Reverb II, or other Twin versions |
FPK-109 |
|
68 Custom Twin Reverb (Silverface, Drip Edge, 2012-present) |
FPK-109 |
|
Ultra Chorus (early 1990s) |
FPK-133 |
|
Ultimate Chorus (early 1990s) NOT Ultimate Chorus DSP |
FPK-133 |
|
Vibrolux Amp AA763 (Blackface) |
FPK-101 |
|
Vibrolux Amp AB763 (Blackface) |
FPK-101 |
|
Vibrolux Reverb AA964 (Blackface) |
FPK-104 |
|
Vibrolux Reverb AB568 |
FPK-104 |
|
Vibrolux Reverb AA270 (Silverface) |
FPK-104 |
|
Vibrolux Reverb with Volume Boost (Silverface, 1977-1980) |
FPK-104A |
|
68 Custom Vibrolux Reverb (Silverface, Drip Edge, 2012-present) |
FPK-110 |
|
Vibroverb AA763 (Blackface) |
FPK-104 |
|
Vibroverb AB763 (Blackface) |
FPK-104 |
|
*Note: Fender™ Potentiometer Set for the following
amplifier ONLY: Frontman 15R or 25R with metal type split/knurled
shafts. This kit is designed for versions
that have metal shaft pots with a split cut down the shaft
approximately 5/16", and the outside of the shaft is "knurled"
or "splined" with ridges. This kit will
NOT work on versions which have pots with a black
plastic shaft that is smooth with a flat surface on one side
(half-moon shaft or "D"-shaped shaft). No kit exists to
replace that type of pot. |
For other brown and blonde "brownface" models from
1960-1963, see our pots here
Do you not see your exact amp model (with
identical date code)?
Contact us
for more information.
Unable to find the date code? No tube chart in the cabinet?
Contact us
for more information.
The date code for blackface and silverface amplifiers from the 1960s and 1970s is located on the tube chart inside the back of the amplifier
cabinet. The following is a Super Reverb AB763:
 |
|
WARNING: These products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.